6 Watts UV Sterilizer | UV Water Steriliser The 6W UV Sterilizer from Monster Mechanical delivers effective, chemical-free disinfection for smaller water treatment systems. Because it uses a 6-watt UV-C lamp, it neutralises harmful microorganisms — such as bacteria and viruses — without altering your water’s taste or quality. In addition, the inline stainless-steel chamber reflects UV light internally, which ensures maximum disinfection even at low flow rates. Key Features of the 6W UV Sterilizer 6W UV-C Lamp: Provides germicidal UV output that protects water from microbial contamination. Stainless Steel Reactor Housing: Built with SUS304 material, the chamber is strong, corrosion-resistant, and promotes efficient UV exposure. Quartz Sleeve: Protects the lamp from direct water contact while maintaining efficient UV transmission. Low Flow Compatibility: Designed to work well in point-of-use or RO systems; similar models run at ~1 L/min or 112 L/h. Long Lamp Life: Many 6W UV systems feature lamps rated for more than 8,000 hours of use. Benefits Using the 6W UV Sterilizer gives you several advantages. First, it disinfects water without chemicals, which means your water stays clean and natural. Next, its compact design makes it easy to install on smaller systems like RO units or under-sink lines. Moreover, because the system requires minimal power and maintenance — just lamp replacements periodically — it remains a cost-effective solution. Finally, the durable stainless-steel reactor ensures that your UV system will serve you reliably over time. Ideal Applications This inline UV unit is perfect for: Point-of-use or under-sink water systems Reverse Osmosis (RO) post-treatment Small whole-house lines with modest flow Rainwater collection taps or small tanks Laboratory or small commercial water lines Maintenance & Care Replace the 6W UV lamp after around 8,000 hours (or as recommended) to maintain disinfection strength. Clean the quartz sleeve during every lamp change to remove mineral buildup and preserve UV intensity. Use a sediment pre-filter if your feed water has turbidity — clear water improves UV effectiveness. Check and replace O-rings to prevent leaks and keep the system sealed. Why Choose Monster Mechanical’s 6W UV Sterilizer? Monster Mechanical’s 6W UV Sterilizer stands out because it combines compactness, efficiency, and durable performance. Whether you’re treating drinking water, using it in RO systems, or protecting a small installation, this unit provides effective disinfection without chemicals. Moreover, its low power consumption and long-life lamp make it economical to run. With reliable construction and consistent UV output, it’s a smart choice for keeping your water clean and safe. Technical Specifications — 6W UV Sterilizer Specification Typical Value / Note Model 6W UV Sterilizer UV Lamp Power 6 W (UV-C germicidal lamp) Lamp Current ~150 mA (typical) Lamp Life ~8,000 – 9,000 hours (replace when output drops) Quartz Sleeve Diameter ~16–23 mm (standard sleeve) Quartz Sleeve Length ~150–220 mm (varies by housing) Flow Rate (recommended) ~1 L/min (~60 L/h) — suitable for point-of-use / under-sink systems Housing Material SUS304 stainless steel (inline reactor) Inlet / Outlet Connections ½″ BSP / ½″ (12.7 mm) standard plumbing fittings Connection Size (alternate) Flexible: adaptors available for 3/8″ or ¾″ where required Electrical 110–240 V / 50–60 Hz (use specified ballast) — confirm with product label Power Consumption ~6 W (lamp) + ballast losses (small standby draw) Dimensions (approx.) Length: 200–260 mm • Body Ø: 30–45 mm (varies by model) Net Weight (approx.) 0.4 – 0.8 kg Operating Temperature 5 °C – 40 °C (ambient) — avoid freezing or extreme heat Recommended Pre-Filtration Sediment / 5 µm filter (required if feed water has turbidity or particles) Mounting Inline (horizontal or vertical) with brackets — keep access for maintenance
