Special Handling Fee: This item is considered hazardous in volumes greater than gallon sizes and will include a special handling fee when ordered in individual units with volumes greater than a gallon. If shipped by air, this item will always require a special handling fee, regardless of volume. Description: 6001 is a high build vinyl ester primer that offers high heat distortion and corrosion resistance with low porosity. It is also an FDA approved coating that is effective in a wide range of applications. Product Features High heat distortion Blister Resistant Marine Application Corrosion Resistant High build Low Porosity FDA Approvable Coating Sandable Eliminates the need for PVA or Wax Surfacing Agent Product Applications Below or Above Water Line Marine Repair Elevated Temperature Tooling Surface In-Mold Barrier Coat (Blister Resistant) Corrosion tank/Pipelining Secondary Containment Surface Coating Water Slides/Fiberglass Pools (When used with Lilly-Ram Top Coats, Ty Coat, and Epoxy/Polyester Application Suggestions Mix Contents of Can Thoroughly The optimum temperature of 77º F Catalyze at 2% with MEKP initiator (10cc/pint) Utilization of HVLP spray gun optimizes finish Tip Size 2.5- 4.0mm Air pressure 25-40 PSI Build to 60 MILS without sagging or cracking (multiple passes required) Allow full cure (24 hours) prior to sand and polish or topcoat application Start with a flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils Specifications Gel Time: 18-22 min @ 77ºF Coverage (20 MILS): 100 sf/gal Flash Point: 98ºF Shelf Life: 3 months @ 68ºF Dust Free Time: 30 min @ 77ºF
