Hustler OEM Heavy-Duty 607408P Spindle Assembly (Reverse or Left-Hand) Fits 2011 - Current Super Z, Super Z HD, Diesel Z, Super 104 and Super 88 Models (Rear Discharge Models Only).
Replace your spindle ass. with the OEM replacement Part that was designed, tested and engineered to withstand the sheer point without sacrificing the strength and durability of your Lawn Mower Deck. Hustler OEM Heavy Duty replacement Spindle Ass. 607408P is designed for Multiple Commercial Hustler Rear Discharge Models/Series Including: 2011 - Current Super Z, Super Z HD, Diesel Z, Super 104, Super 88 (Rear Discharge Models Only). Please Refer to the Images above, Model Fit Chart, Special Notes and Help Links below to ensure a proper fit. Click on the Part Numbers and Help Links to be redirected. Part Number 604256 and 607408 Supersede to Part Number 607408P. Important Note: 607407P will be used on Side and Rear Discharge Whereas 607408P will Only Be Used on Only Rear Discharge Models and Will be Used in Conjunction with 607407P. In Oder to Eliminate Confusion as to Which Spindle Assembly is Required for Each Location on your Mower Deck Refer to the Images Above - Images are Organized for Each Family/Series of Mower that 607408P Will be Used On. ASSOCIATED REPLACEABLE SPINDLE ASSEMBLY PART REFERENCES & HELPS 607407P/607408P REAR DISCHARGE COMBINATION NOTE: Select Rear Discharge Models Will Require a Reverse or Left-Hand Mower Blade (OEM Left-Hand Mower Blades are Always Painted Red) and for those Mower Blades they will Require a Different Spindle Assembly than the Normal Right Hand Mower Deck Blades - Refer to the Images Above for Detailed Location, Placement, Quantity and Required Part Numbers for the Listed Models 607407P - Normal Right Hand Mower Blades Spindle Assembly 607408P - Left Hand Mower Blade Spindle Assembly (OEM Mower Blade are Painted Red) 607408P SPINDLE ASSEMBLY REBUILD PARTS * Review Rebuild Help Links and Images Below for Additional Help and References 212472 - SHAFT/PULLEY KEY X 1 114108 - PULLEY SPACER X 1 * Used Only Under the Spindle Pulleys on the Left-Hand Mower Blade & Spindle Assembly 607409-4 - UPPER DUST CAP X 1 607407P BEARING KIT - BOTH UPPER AND LOWER BEARINGS X 1 (Comes as a Bearing Kit) * Contains Both Upper and Lower Bearing for Spindle Assembly 607408P 607955 - UPPER AND LOWER BEARINGS X 2 (Comes as Individual Bearings) 607478 - GREASE RELIEF FITTING X 1 607477 - GREASE ZERK X 1 114988 - BLADE BOLT SHIELD X 1 782474 - REMOVEABLE BELLEVILLE BLADE BOLT WASHER X 1 604383 - BLADE BOLT X 1 * Reverse or Left-Hand Threads - For Reverse Rotation. 607407P SPINDLE ASSEMBLY/MOWER DECK FASTENERS 016527 - BOLT X 4 Per Spindle Assembly - Assembled through the Mower Deck and then through the Spindle Assembly (1/2 X 1.00 - 13) * Select Models Only 705954 - CARRIAGE BOLT X 4 * Per Spindle Assembly - Assembled through the Mower Deck and then through the Spindle Assembly (1/2 X 1.25 - 13) * Select Models Only 017616 - BOLT X 4 Per Select Spindle Assembly - Assembled through the Mower Deck and then through the Spindle Assembly (1/2 X 1.75 -13) * Select Models Only 767962 - FLAT WASHER X 8 Per Spindle - Assembled Against the Bolt Head and Against the Nut. SPECIAL TOOLS 115776 - DECK STRAIGHTENER - Designed To Bolt in Place of the Spindle Assembly and Allows you Pound on it to Straighten the Mower Deck (Damage May Occur to the Erea of the Spindle Assembly and Twist the Mower Deck Shell if the Blade Hit something that Cause Damage to the Spindle Assembly or Causes the Unit to Shut Off - Easy Way To Determine if the Mower Deck is Twisted is to Verify the Mower Blade Ends Line up from Point to Point [Could Turn them Inline of Each other and Use a Straight Edge if it Simplify the Process] if they Do Not Line up your Mower Deck Shell is Twisted and will need Straighten often the Twist Happens in the Erea of Impact or Around the Spindle Assembly - Mower Blade End Should Be Within 1/16 - 1/8 of Each - Always Verify the Mower Blades are Not Bent). REBUILD HELP LINKS Spindle Part Number 607408 - https://www.youtube.com/watch?v=eV76B6zpdH4 Specification Product Number: 604256, 607408, 607408P Brand: Hustler Length: NA Width: NA Height: NA Weight: NA Model Fit: * 607408P May Be Used on Additional Models/Families like Deisel Z & Super 104 Models - Due to Lack of Information and Details - Hilly Ridge Will Continue to MANUELLY Improve the Model Fit Chart with Time - If you Have any Questions on Exact Fit Feel free to Message or Call us. Super Z (2011 - Current 60" & 72" Rear Discharge Models Only) 930024, 930065, 932053, 932061, 934216, 934224, 935023, 935064, 936914, 936955, 940031, 940049, 941195, 941203, 942862, 942912, 943910, 943944 Super Z Hyper Drive (2011 - Current 60" & 72" Rear Discharge Models Only) 932178, 932186, 934307, 934315, 934935, 934976, 937011, 937052, 941245, 941286, 941559, 941567, 943035, 943043, 944025, 944033 Diesel Z (60" - 72" Rear Discharge Models Only) Super 104 Models are Currently Not Listed Will Be Eventually Super 88 936617, 939546 Not sure if this is the correct part? Contact us with your Hustler model and serial number and we will verify the correct part before you order.
Related
Related
Related
Related