T8 LED Tube 60cm 10W with Liteplan NLP/1S/80-K Emergency Conversion Pack This combined kit includes a 60cm LED T8 tube and the Liteplan NLP/1S/80-K emergency conversion pack, creating a practical emergency lighting solution for linear LED fittings. The 60cm LED T8 tube provides efficient everyday lighting, while the Liteplan NLP/1S/80-K conversion pack allows the fitting to operate in emergency mode during a mains power failure. This makes the kit suitable for corridors, utility areas, commercial spaces, offices, workshops and other indoor locations where emergency lighting backup is required. The NLP/1S/80-K is a slim emergency conversion module designed for integral use within a luminaire. It operates with long life LiFePO4 lithium iron phosphate batteries and is suitable for LED loads operating within a voltage range of 6V to 80V. Key Features Complete combined kit with 60cm LED T8 tube and emergency conversion pack Liteplan NLP/1S/80-K emergency pack for integral use inside a luminaire 3 hour emergency duration during mains power failure Long life LiFePO4 battery for reliable emergency performance Suitable for LED loads from 6V to 80V Automatic output current adjustment to match the battery and LED load Average emergency power of 2.6W Slim module design suitable for linear lighting applications Deep discharge protection to help protect the battery Battery temperature protection for safer charging operation Low power consumption during charging Third party tested and certified by TÜV 60cm LED T8 Tube The included 60cm LED T8 tube is designed for efficient, bright and reliable linear lighting. It is suitable for use in compatible T8 fittings and provides a clean lighting upgrade for indoor commercial and domestic applications. Tube Type LED T8 Tube Tube Length 60cm Tube Power 10W Normal Light Output 1000 lumens Liteplan NLP/1S/80-K Emergency Pack The Liteplan NLP/1S/80-K is a 3-hour emergency lighting conversion kit for LED loads. It automatically adjusts the output LED current to provide the best match between the battery and the connected load, helping to maximise emergency illumination while maintaining the full emergency duration. This makes the unit suitable for a wide range of LED circuits and linear lighting applications, including compatible LED tube fittings and LED luminaires. Emergency Pack Technical Specification Emergency Pack Model Liteplan NLP/1S/80-K LED Load Voltage Range 6V to 80V Mains Supply 230V to 240V AC, 50/60Hz Emergency Duration 3 hours Average Emergency Power 2.6W Power Rating During Charging 2.7W, 17mA, λ = 0.67 Recharge Period 24 hours Battery Type LiFePO4 lithium iron phosphate Battery Size 3.2V 4.8Ah Battery Discharge Current 1A nominal Discharge Voltage Limit 2.4V Battery Temperature Parameters 0°C to 55°C Ingress Protection IP20 Push Wire Terminal Size 0.5mm² to 1.5mm² Dimensions And Weight Module Dimensions 178 x 30 x 22.5mm Module Fixing Centres 172mm Module Weight 0.085kg Battery Dimensions 230 x 24 x 21mm Battery Fixing Centres 215mm Battery Weight 0.14kg Battery Protection The emergency conversion pack includes deep discharge protection and battery temperature protection. The charger will cut off if the battery temperature falls below 0°C or rises above 55°C. The product can still operate in emergency mode when required, provided there is sufficient battery capacity remaining. Applications Emergency converted LED tube fittings Corridors and escape routes Commercial buildings Offices and retail spaces Warehouses and workshops Schools and public buildings Utility rooms and communal areas What Is Included? 1 x 60cm 10W LED T8 tube 1 x Liteplan NLP/1S/80-K emergency conversion kit Important Installation Notice This product is intended for emergency lighting conversion inside a compatible luminaire. It must be installed, wired and tested by a qualified electrician in accordance with the relevant emergency lighting standards and site requirements. Please check compatibility with the existing fitting, LED tube and available internal space before installation.