Front C10 Kit lays crossmember on up to 24" wheels with low profile tire. Everything is pre-welded onto the base plate. You cut off your factory spring and upper control arm perch, and weld it in. This kit includes the updated driver side upper arm that allows you to lay 22" wheels without having to do any steering work. No more sketchy steering knuckles. Factory steering shaft will work. This kit contains:Pair of Upper Tubular Control Arms (left and right)Pair of Lower Tubular Control Arms w/lower shock mountsPair of frame brackets containing upper control arm mounts, bag plates, and shock mounts all in one unit.Upper Balljoints Lower BalljointsPair of ShocksLower Control Arm Cross Shafts (bolts to factory location using factory U-bolts)Grade 8 hardware*Drop spindles are required to lay 22" and 24" wheels and need to be re-tapered to accept these ball joints. Use your own 10 degree balljoint reamer, or ship your Drop or Stock Spindles to Chassis Fab to be re-tapered for free, you only have to pay for shipping to and from Chassis Fab. Ships raw steel. For off-road and show use only. -FOR THE COIL OVER SETUPS- Our setup is built around QA1 Coilovers. THEY ARE NOT INCLUDED, AND THE PART NUMBERS ARE PROVIDED BELOW. SummitRacing.com has a good stock of these, and ship fast. QA1 Aluma Matic Coilover Shocks ALN3855P QA1 High-Travel 7 Inch Coilover Spring 7HT650 CURRENT LEAD TIME 3-6 WEEKS SHIPS RAW STEEL
Related
Related
Related
Related