Stationary Industrial Hot Water. Single-Phase Compatible. The BE Power 2,300 PSI NG/LP Industrial Hot Water Pressure Washer with Baldor Single-Phase Motor is the permanent-install Industrial flagship for commercial facilities with standard 230V single-phase service. Unlike the 3-phase 64HD-3 sibling, this unit runs on the single-phase 230V service common in most commercial spaces, opening Industrial-grade hot water pressure-washing to auto shops, restaurants, and food processing facilities without 3-phase service. At the heart is a Baldor 6 HP single-phase industrial motor (230V, 26-25A) driving a premium General TSS1511 industrial triplex pump through a belt-drive system for extended pump life. A 147 ft heating coil with electric-ignition thermostat-controlled NG or LP burner cycles automatically to maintain target water temperature up to 200°F. Features a time-delayed shutdown with push-button restart and an optional remote control station for multi-bay facilities. Features NG or LP Utility Fuel: Connect to your facility's natural gas or propane line for cheaper, cleaner, lower-maintenance hot water heating than diesel-fired alternatives. No diesel tank to refill, no spillage risk, no fuel odor. Baldor 6 HP Single-Phase Industrial Motor (230V): Premium industrial motor brand engineered for commercial duty cycles. Single-phase 230V service is standard in most commercial buildings, making this unit accessible to a much wider range of facilities than 3-phase alternatives. Belt-Drive System for Maximum Pump Life: Belt-drive lowers pump heat, vibration, and operating RPM. This dramatically extends pump life compared to direct-drive units, often 2x to 3x longer in heavy daily commercial use. Industrial-Grade General TSS1511 Triplex Pump: Same premium industrial pump used in the truck-mount HW4013HBG, with reinforced body, forged brass manifold, solid ceramic plungers, and thermal release valve. Built for the harshest commercial duty cycles. 2,300 PSI Premium Cleaning Pressure: Higher pressure than the 3-phase 64HD-3 variant. Strips grease, paint, and stuck-on residue with industrial-grade force. Hot Water Heating Up to 200°F: Thermostat-controlled burner with electric ignition cycles automatically to maintain target water temperature. Once at temperature, the burner modulates instead of running continuously, saving fuel. Cam Switch Burner Off Capability: Turn off the burner via the cam switch for cold water cleaning or end-of-day cool-down without shutting off the pump. One machine, two modes. Time-Delayed Shutdown with Push-Button Restart: Unit times out at adjustable preset intervals to save energy. Restart with a single button push. Reduces motor wear and electricity costs in multi-bay operations. Massive 147 ft Heating Coil: Half-inch cold-rolled steel coil with significantly more tubing than the standard 96 ft coils on other BE Power hot water washers. More tubing means more efficient heat transfer and longer service life. External Unloader for Easy Maintenance: External unloader placement allows easy service access and effective water flow regulation. Selectable Coil Position (Left or Right): Specify left or right coil position at order to match your facility's plumbing and discharge layout. A real installation flexibility advantage. Optional Remote Control Station: Add the optional remote station for Start/Stop/Restart, Burner On/Off, and Detergent On/Off control from up to 10 ft away (longer leads available). Ideal for multi-bay wash facilities where the operator is far from the unit. Indoor-Safe Operation: Electric motor produces zero exhaust. The NG/LP burner produces combustion gases that must be vented per local code, similar to a commercial water heater installation. 48" Insulated Spray Gun Wand: Longer wand than commercial units for better reach into tight spaces, under vehicles, and around large equipment. 50 ft Steel-Braided High-Pressure Hose: Standard commercial hose length for working around large equipment and facility spaces. Industrial Series Build Quality: BE Power's top tier, engineered for the most demanding professional, daily-use, and continuous-duty industrial applications. Built for Stationary Industrial and Commercial Wash Bays The 64HD is the permanent-install Industrial choice for facilities with single-phase 230V power and utility gas: Auto dealership and fleet service shops: permanent in-bay installation for daily fleet, customer vehicle, and equipment cleaning Commercial auto detail bays: dedicated heated cleaning station for high-volume detail operations Restaurant and commercial kitchen wash bays: floors, equipment, hood degreasing, exhaust fans, and grease-trap areas Food processing plants: floors, equipment, conveyor cleaning where health codes require continuous hot water availability Industrial wash bays: machinery, conveyor lines, factory floors, and equipment cleaning in continuous-duty manufacturing facilities Commercial laundry facilities: equipment cleaning, process water support, and facility maintenance Bus, truck, and rail maintenance facilities: permanent stationary install for daily vehicle cleaning across multiple bays Multi-bay car wash facilities: dedicated heated cleaning station with optional remote control Slaughterhouses and meat processing: continuous hot water for sanitation in food-production environments Industrial parts cleaning operations: machine shop, engine rebuild, and component cleaning bays Dairy farms and large livestock facilities: continuous hot water for sanitation of parlors, milking equipment, and pens Marine facilities and boatyards: permanent installation for vessel and yard equipment cleaning Important Ventilation and Code Note: While the electric motor produces no exhaust, the NG/LP burner produces combustion gases that must be vented per local building codes. Install in a location with appropriate exhaust venting, similar to a commercial water heater installation. Always consult a licensed gas-fitter for proper venting and gas-line connection. Specifications GENERAL SPECIFICATIONS Model 64HD Series Industrial Frame Material Powder-Coated Steel (Stationary Cabinet) Installation Stationary (No Wheels) MOTOR & ELECTRICAL Motor Baldor 6.0 HP (1,450 RPM) Voltage / Amperage 230V / 26-25 Amps (Single Phase) Control Systems Time-Delayed Shutdown with Adjustable Push-Button Restart Cord Length 10 ft PUMP PERFORMANCE Pressure / Flow Rate 2,300 PSI / 4.0 GPM Pump Model / Type General TSS1511 / Triplex Drive Type Belt Drive Construction Forged brass manifold, solid ceramic plungers, thermal release valve HEATING SYSTEM Max Water Temp 200°F (93°C) / Adjustable Thermostat Burner Electric Ignition (Natural Gas or Liquid Propane) Heating Coil 1/2" Cold Rolled Steel, 147 ft Tubing Cold Water Mode Cam Switch Burner Off functionality ACCESSORIES Hose 50 ft × 3/8" Steel Braided High-Pressure Spray Gun / Wand 48" Insulated Wand with Quick-Connect Fittings Nozzles 15° and 25° Quick-Connect DIMENSIONS & WEIGHT Unit Weight 700 lbs Unit Size (L×W×H) 52" × 21" × 46" WARRANTY Warranty Coverage 5-Year Pump / 3-Year Heating Coil / 2-Year Motor What's in the Box BE 64HD Stationary Industrial Hot Water Pressure Washer (Baldor 6.0 HP Single-Phase Motor, General TSS1511 Industrial Triplex Pump, NG/LP Burner) in Powder-Coated Steel Cabinet 50 ft × 3/8" Steel Braided High-Pressure Hose 48" Insulated Spray Gun Wand 2 Quick-Connect Nozzles (15°, 25°) Adjustable Low-Pressure Chemical Injector Assembly Note: Coil position (left or right) must be specified at time of order to match your facility plumbing layout. Gas line, electrical connection, water supply, drain plumbing, and burner exhaust venting must be installed by licensed professionals. NG/LP fuel and electrical/water/drain connections are NOT included.
Related
Related
Related
Related