Part Number 8L2A-12A650-HC ECU will arrive with updated part number sticker having been programmed with latest Ford Software Updates! Fitment/Interchange This ecu will interchange or replace the following ecu part numbers on 2008 EXPLORER MOUNTAINEER 4.0L models : 8L2A-12A650-HB 8L2A-12A650-HC 8L2A-12A650-HD 8L2A-12A650-HE 8U7A-12A650-ADA Tech Notes ECU has been REBUILT then tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! Some of those are listed below: Issue that cause the O2 sensor, EGR and P0443 issues has been rebuilt! Reference Voltage Good! ECU has TCU communication! ECU powered up and has communication! ECU fuel pump/main relay tested good! ECU injectors/coils tested good and much more! Install Notes Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post. Disconnect and remove the module to be replaced. Install and connect the replacement module. Connect the negative terminal of the battery. See "Programming / PATS Security" below for additional install instructions. Programming / PATS Security For Plug and Play you must do the following three steps: Step 1: Match your part number per above fitment guide Step 2: Program ecu to your VIN. We provide free programming for our customers. During checkout you must list your VIN and mileage in the "Notes to Seller" for us to program the ECM. If we do not hear from you through the order notes or a message through eBay we will assume your mechanic is performing the programming (no problem at all) and we will ship the ECM out the next business day as directed by eBay. Step 3: If your vehicle has PATS security (Most Ford/Lincoln/Mercury's do) you must have your keys programmed. We recommend you have this done by your local locksmith. In most cases they will travel to your location and the process takes less than 30 minutes. No towing necessary and your local locksmith will be cheaper than a dealer. Item Condition Mounting points are all open and intact Pins perfect, none are broken or bent Connector plastic may have minor chip but pins, guides and lock tabs are in place. Warranty / Optional Core Return This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item. If you would like to return your core for a $20 partial refund let us know during checkout through the "notes to seller" and we will send a prepaid return label with your order. It's that simple. Once your original item comes in we will process your refund promptly.
Related
Related
Related
Related