The NEW PUK 6.1 - the LATEST INNOVATION from Lampert The PUK 6.1 is the logical further development of the globally successful PUK 6 and benefits from 24 years of experience and expertise in the development of welding equipment for jewelry manufacturers, goldsmiths, silversmiths, jewelers, watchmakers and many more. The PUK 6.1 not only offers a faster spot weld sequence, the speed can now also be set continuously. In addition, up to 5 individual configurations can be saved permanently and the PUK 6.1 starts automatically from standby mode in the last settings having been used. The PUK 6.1 has a new PIN mode on board for welding pins or ear studs. Computer-aided simulations and numerous welding tests have once again noticeably improved the precision, homogeneity and appearance of the precious metal welding spots compared to the PUK 6. This takes the fine welding technology of the PUK 6.1 to an uprecedented new level. The PUK 6.1 easily handles material thicknesses of less than 0.2 mm and, in addition to welding all precious metal alloys for fittings, studs, eyelets, chain links, rings etc., now also enables simple welding of ear studs and pins. WELDING Up to 3.3 welding spots per second: Welding sequence now up to 65 % faster Smoother, more homogeneous weld spots – excellent weld seam even with variable weld spot gaps Higher heat input where needed: Perfect welding results even with critical materials 50 % smaller welding spots in low power range Minimal pulse duration now down to 0.1 ms: 67 % shorter welding time in micro mode HANDPIECE AND ELECTRODE 20 % faster and, thus, more agile electrode travel Maximum electrode thickness now up to 1 mm Up to 50 % longer service life of the electrode(Measured average improvement in test trials; actual improvement depending on individual usage mode) HANDLING 70 % higher screen resolution for improved viewing angle in any operating condition Quick operation and material selection through direct menu selection with one single turn-push-tilt knob New standby mode: Continuous availability at 85 % lower energy consumption DESIGN Newly structured display design with improved resolution Clear design language with timeless aesthetics – a visual highlight at every workplace Fine, selected materials for highest standards on value and appearance PERFORMANCE Optimised welding curves for all weldable alloys in jewellery manufacturing Higher maximum power and improved welding performance, particularly with highly conductive silver, copper and tin alloys due to new speed function New standby mode – quick restart, minimum energy consumption OPERATION & FUNCTIONALITY NEW: One-hand joystick with turn-push-tilt function as well as simplified, intuitive menu guidance Quicker maximum welding spot sequences due to the enhanced speed function – adjustable in 3 levels Refined micro-mode enables new welding possibilities with finer increments in adjustment when welding at the lowest possible performance range Newly designed and patented welding process control prevents welding errors, enables even quicker learning of the PUK welding – easier start for the PUK beginner INCLUDES Handpiece 3m Gas Hose Power Cord 1x Contact Clamp Diamond Grinding Wheel 6x Electrodes (0.8mm x 4, 1.0mm x 2) PUK Flow Regulator Welding Microscope SM6 Electrode Grinding Motor PUK6
