Description The Knightsbridge 6A 2-way dummy dimmer switch module is a front-mounting grid module designed exclusively for the Curved Edge grid system. The module provides push on/off switching without actual dimming capability — the rotary dial operates as a rocker switch to turn circuits on and off, making it useful for replacing a dimmer module with a standard switch while maintaining a consistent appearance across a grid plate. Designed for residential and light commercial installations where grid systems are used to combine multiple controls on a single faceplate, the module fits Curved Edge grid frames and requires a 35mm minimum back box depth. The 2-way switching allows the same circuit to be controlled from two locations, making it suitable for hallways, staircases and rooms with multiple entry points. The white thermoset resin and polycarbonate construction gives the module a clean, durable finish that resists discolouration under UV exposure better than standard thermoplastic switches. The IP20 rating makes it suitable for dry interior locations. The module carries anti-microbial properties tested to ISO 22196:2011, making it appropriate for healthcare, education and food preparation environments where surface hygiene matters. Specification Length 55 mm Height 25 mm Width 55 mm Min. Mounting Box Depth 35mm Construction Thermoset resin Construction 2 & polycarbonate Finish White (UREA) IP Rating IP20 Primary Voltage 230V 50Hz Anti-Microbial Properties 3rd Party Tested to ISO 22196:2011 Warranty 2 Downloads Product Specification Sheet Frequently Asked Does this module actually dim lighting? No. This is a dummy dimmer, meaning it has the rotary dial appearance of a dimmer but operates as a simple push on/off switch. It is used to maintain visual consistency across a grid plate when a dimmer module needs to be replaced with a standard switch. What is the Curved Edge grid system? Knightsbridge's Curved Edge grid system allows multiple switch and socket modules to be mounted on a single faceplate, creating a custom control panel. This module only fits Curved Edge grid frames — it is not compatible with other grid systems or standard single-gang faceplates. What back box depth is required? A 35mm minimum back box depth is needed for safe installation. The module sits within the grid frame, which then mounts to the back box. Can this be used in bathrooms or kitchens? The IP20 rating makes it suitable for dry interior locations only. It is not rated for direct water exposure, so should not be installed within bathroom zones or in outdoor locations. The anti-microbial properties do make it suitable for kitchens and food preparation areas where surface hygiene is a concern.
Related
Related
Related
Related