Build your own 7-string hollow guitar kit with a mahogany body, ebony fretboard, F-holes, and Florentine-style single cutaway. Full Specifications General Dexterity: Right-Handed Number of Strings: 7 Size: Full Size Build Difficulty: Advanced (8/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Adjustable bridge sets intonation quickly once the posts are seated Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany Plywood Type: Hollow Body Sound Holes: 2 f-holes Internal Support: Bridge block, Mahogany Cutaway: Single Florentine style Binding: Single White Top Veneer: None Neck Material: Maple Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: Single White Width at 5th Fret: 54 mm Width at 9th Fret: 56 mm Width at 22nd Fret: 64 mm Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Block Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: Single White Nut: Bone Nut Width: 47 mm Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 2 Volume, 2 Tone, 3-Way Toggle Switch Output Jack: Side jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Sealed Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Black What's in the Box Hollow archtop guitar body with two f-holes, unfinished Guitar neck with dark fretboard and abalone block inlays 7x black sealed tuners with bushings and washers 2x black-covered humbucker pickups with seven pole pieces per row Black adjustable bridge 2x black bridge posts with anchors Black stop bar tailpiece 2x black tailpiece studs with anchors Pre-wired control harness with 4 potentiometers 3-way toggle switch with black tip 4x black knurled domed knobs Black archtop pickguard with black mounting bracket Black bell-shaped truss rod cover 2x black strap buttons with felt washers Set of strings Black instrument cable Allen wrench Assorted black screws Hex nuts, washers and trim rings What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
