Oyaide ACROSS3000 SGY/2.0m (speaker cable with Y-lug terminal)

Ikebe Musical Instruments Store Verified independent store

→

★ACROSS 3000 SGYY speaker cable with lug terminals The ACROSS 3000 features an original and innovative cable design created by the revolutionary cross-insulated "CIS" structure, wh ich uses an air layer as a damper. The original ACROSS 2000 was released in 2006 as the first speaker cable in the ACROSS series with a 2.0 sq conductor. In 2015, it was redesigned as the ACROSS 3000, adopting Oyaide's proprietary precision conductor 102 SSC/3E twist, and increasing the conductor diameter to 3.0 sq. Since its release, ACROSS speaker cables have been Oyaide Electric's core speaker cables, boasting a total shipment of over 100,000 meters. Their high performance is recognized by audiophiles worldwide. The ACROSS 3000 SGY has been updated with a redesign of the cable components from the previous model to allow users to experience the high basic performance of the ACROSS 3000 speaker cable even more fully as a complete product with plugs. Newly developed SGSL pure silver + thick 24K gold-plated Y-lugs and NRF-005T non-magnetic noise suppression tape have been adopted, and every detail of each material has been carefully considered and updated. While minimizing output signal loss from the amplifier, it transmits the signal to the speaker as is, eliminating as much as possible the inherent characteristics of cables, including plugs. Its flat, neutral tone and quick response accurately portray music without swelling the sound image, providing a natural connection of sound from low to high frequencies, accurate phase and time alignment, and distortion-free detail. By creating a more accurate sound field, vocals are positioned at the height of the speaker's tweeter in a balanced manner without being scattered upwards, and bass sounds are perceived lower, reproducing music with a natural sound image between the speakers. All audio accessories, including cables, have an interactive relationship with audio equipment. The ACROSS 3000 SGY has made a dramatic evolution, helping to reveal previously unnoticed details in music of all ages and genres, regardless of whether the source is digital or analog. Enjoy this masterpiece, a product of Oyaide's pride and joy, that represents the pinnacle of innovative technology. ■Product Features Oyaide Electric's pride and joy, the precision conductor 102 SSC, is used. To minimize the inclusion of impurities, only virgin copper that does not contain any recycled copper is used, even among oxygen-free copper that complies with JIS C1011. Peeling processing is applied to remove 100% of impurities that have adhered to the surface. To ensure smoother flow of electrical signals on the surface of the conductor, the wire is thinned using a natural diamond die, improving the surface smoothness of the wire. This is a wire that has been thinned with a processing precision of ±1 μm, which far exceeds the standard error tolerance of ±8 μm. The patented 3E twisting process twists together wires of three different thicknesses, resulting in the world's first high-density, different-diameter conductor 3E twist structure (patented by Sanshu Electric Wire). This increases the density and roundness of the wire, stabilizing electrical properties. Two annealing processes eliminate mechanical stress distortion of the wire. We thoroughly manage our products, including manufacturing control values, maintenance, and shipping dates. The 3E twist structure is a bundled stranded conductor with a concentric twist arrangement, and by arranging three different wire diameters, the twist arrangement is made more precise and the conductor characteristics are improved.These three different conductor diameter wires are arranged geometrically, minimizing the gaps between the wires and improving the wire density. Furthermore, the outer diameter of the twisted wire is kept stable and highly accurate, and the cross section after twisting is a perfect circle, making it a conductor structure that is unparalleled in the world. This allows the insulator and conductor to adhere evenly, eliminating random thickness of the insulation material and making it uniform, thereby stabilizing electrical characteristics, etc. Oyaide Electric's unique cross-insulated structure (CIS structure) uses an air layer as a damper, lowering capacitance and improving high-frequency characteristics while attenuating vibrations with its excellent stabilizer effect. The CIS structure supports the center conductor at a point rather than a surface, minimizing mutual interference between the center conductor and the outside world. The CIS structure not only provides excellent stabilization, but also contributes greatly to improved electrical characteristics. The air gap is highly effective in significantly reducing capacitance. The insulating material that makes up the CIS structure is made of high-molecular-weight polyolefin, which has an extremely low dielectric constant - 1/4 that of commonly used PVC. The exterior sheath is a halogen-free sheath developed specifically for audio applications by Furukawa Electric. Its high vibration-damping properties and improved electrical characteristics enable lossless bass reproduction. This unique structure and carefully selected materials give the ACROSS 3000 its unrivaled agile response and stress-free spatial expression. Newly adopted Oyaide's original SGSL pure silver plated base + thick 24K gold plated Y lug A total of eight locations on both the left and right terminals are fitted with Oyaide Electric's newly developed SGSL pure silver-plated Y-lugs with thick 24K gold plating for speaker terminal connection. SGSL takes advantage of the long-term stability and smooth phase characteristics of the midrange that the gold plating provides, while the silver plating on the base extends the high-frequency range, resulting in exquisite tuning. The base material is lead- and iron-free, RoHS-compliant brass, made in Japan. The tip is rolled from a 15mm diameter round bar, then punched and bent using a special mold. The tip insertion section has two sections, 6mm and 8mm, to fit a wide range of speaker terminals. The heat-treated body is mechanically barrel-polished, then individually buffed by hand by a polishing craftsman. Once polished to perfection, the body is then finished with a two-layer plating of pure silver base and thick 24K gold plating. A 5mm diameter high-rigidity stainless steel set screw is used for the 4mm diameter cable entry section. This eliminates any gap between the body and the screw, and the cable and plug body are securely connected and fixed by two screws. The SGSL and cable are joined using torque-controlled screws, and the plug and cable are completely sealed with a heat-shrinkable tube made of cross-linked polyolefin with adhesive, which provides durability, prevents oxidation of the conductor, and has excellent gas barrier properties. Equipped with the innovative non-magnetic noise suppression tape NRF-005T, which suppresses noise inherent in speaker cables. Speaker cables are susceptible to electric field noise due to floating electrostatic capacitance between the conductors. The NRF-005T is an innovative non-magnetic noise suppression tape developed using PULSHUTR, developed by Asahi Kasei Corporation. PULSHUTR suppresses electric field noise by converting it into Joule heat, while having almost no effect on the original sound. Tuning with the NRF-005T achieves a balance between musical dynamism and fidelity to the original sound, unlike anything before. When tuning, the NRF-005T is attached to the cable branching point on the speaker side to determine the sound, so when installing the cable, be sure to connect it so that the signal flows in the direction of the arrow printed on the surface of the cable. ■Features of ACROSS 3000 SGY・Oyaide Electric's proud precision conductor 102 SSC・The 3E twisted structure minimizes the gaps between the wires, resulting in a perfectly circular cross section after twisting. This eliminates random thickness of the insulation material and makes it uniform, achieving stable electrical characteristics.・The revolutionary cross-insulated "CIS" structure uses an air layer as a damper Pure silver-plated base + thick 24-karat gold-plated Y-lug SGSL is newly adopted, taking advantage of the long-term stability and smooth phase characteristics of the mid-range that the gold plating provides, while the silver plating on the base extends the high-range, resulting in exquisite tuning. - Two-stage design (6mm and 8mm) to fit a wide range of speaker terminals - Equipped with Oyaide Electric's original non-magnetic noise suppression tape NRF-005T, which uses PULSHUTR developed by Asahi Kasei Corporation. Achieves both musical dynamism and fidelity to the original sound. - The adhesive-backed cross-linked polyolefin heat-shrinkable tube completely seals the plug and cable, blocking out air and preventing oxidation of the conductor for a long period of time. ■Product specifications/Product name: ACROSS 3000 SGY・Cable: ACROSS 3000 Cable structure: CIS (Cross Insulated Stabilizer) structure Cable conductor: Precision conductor 102SSC - Wire configuration: 3.0 sq (37/-3E twist) Cable insulator cross section: High molecular weight polyolefin Cable insulator outer section: Polyethylene Cable exterior: Halogen-free sheath for audio Cable outer diameter: 9.2 x 18.5 mm Conductor resistance: 0.63Ω/100m (at 20℃)・Capacitance: 34pF/m (1kHz) Terminal plug: Y-lug SGSL (brass material (RoHS compliant) pure silver-plated base/thick 24K gold-plated) Show more