Oyaide SCR-S [High-Performance Record Cartridge Mounting Screws, Nuts, and Washers Set]

Ikebe Musical Instruments Store Verified independent store

→

[Please be sure to check before purchasing] *Please make sure to check that the screw length is compatible with your cartridge before purchasing. Please note that we will not accep t returns or exchanges if the screw size is not compatible with your cartridge. --- This short version of the high-rigidity record cartridge mounting screw/nut/washer set eliminates rattle and looseness between the headshell and cartridge, contributing to improved sound quality. When playing records, the cartridge is the gateway to the sound, and choosing the right cartridge is one of the joys of being an analog audio fan. However, even if you go to the trouble of buying a cartridge, if the screws are not properly selected or installed, you will not be able to fully utilize its capabilities. For example, standard aluminum screws have low rigidity and are not ideal for sound quality. Also, with conventional attachments using only screws and nuts, the screws tend to spin freely and become loose, causing the cartridge to rattle and come loose. The SCR-S was developed to solve this problem and provide a better record life. By using the SCR-S, you can securely attach your cartridge and maximize its performance. ■Features of SCR-S 1) Screws/Nuts The screws/nuts are made of highly rigid brass and plated with 24K gold, enhancing corrosion resistance while adding a touch of luxury to the cartridge. Additionally, a gold-plated layer with a different hardness from the brass disperses the vibration modes inherent to the material. The screws are flat-head screws, which are easier to tighten and less prone to stripping than Phillips screws. The nuts feature a non-slip knurling, making it easier to press the nut down when tightening and reducing the risk of the screw spinning. The outer diameter of the screw/nut is a small 4mm, which minimizes damage to the cartridge and is compatible with headshells that have a counterbore for screw head insertion. 2) Carbon Graphite Nylon Washer: A key component of the SCR-S is the industry's first carbon graphite nylon washer, a new material. This washer combines the properties of both metal and resin, providing just the right amount of slippage and cushioning, reducing screw slippage and enabling stronger tightening. This enhances the seal between the cartridge and headshell, eliminating cartridge rattle, which can degrade sound quality. The washer's outer diameter of 4.7mm is larger than the outer diameter of the screw head/nut, increasing the contact area with the cartridge/headshell. By distributing the screw bearing surface pressure, deformation and depression around the cartridge are reduced, making the screw less likely to loosen. 3) Screw Length Two lineups are available: [SCR-S] with screw lengths of 6/8/10mm, and [SCR-L] with screw lengths of 12/14/17mm. You can purchase the one that best suits your cartridge/headshell without waste. *The page you are viewing is the short version "SCR-S". [SCR-S specifications] - Please check the screw length of the product you have before purchasing. - The indicated length of the screw is the under-neck dimension (length excluding the screw head). - The washer can be attached to either the screw or nut side. - Please bring your own precision screwdriver (flat head). - Do not tighten too much as this may cause damage. -When attaching the nut, insert the screw from the side of the hole that is tapered inwards. - Cannot be used with cartridges that have M2.5 female screws (screw holes). ■Contents 24K gold-plated brass screws: M2.6 x 6/8/10mm (2 each) 24K gold-plated brass nuts: M2.6 (6) Carbon graphite nylon washers: 6 *We strive to delete items promptly after they are sold in-store or via mail order, but there is inevitably a time lag when deleting items from the website. Please note that there may be cases where an item is sold out. Show more