EXFORM PREMIUM USB CABLE for DJs 1.0m [DJUSB-1M-YLW-CtoA]

Ikebe Musical Instruments Store Verified independent store

→

★C to A connector type USB cable made in Japan with OFC, focusing on sound quality and reliability★ ●You can directly connect a laptop with a Type A USB connector to a Type C USB-c ompatible interface. (There is no longer any need for a conversion adapter, which can introduce noise and cause signal degradation.) ●By using highly conductive Japanese-made OFC conductors (*) for not only the signal lines but also the power lines, loss in digital transmission is minimized. Digitized audio signals and DJ control signals are reliably transferred via USB 2.0 (Hi-Speed/Max 480 bps). (※) Compared to the widely used wire material TPC (Tough Pitch Copper), OFC (Oxygen Free Copper) with a purity of 99.996% has excellent characteristics as a wire material for transmitting not only analog signals but also digital signals, suppressing signal distortion and minimizing transmission loss. The signal lines are shielded with aluminum PET tape and are securely grounded at both ends by drain wires. The entire cable, including the power line, is again shielded with aluminum PET tape, and then covered with a copper braided shield. This triple shielding method minimizes external noise and also reduces signal conduction loss. Not only that, the twisted pair structure of the two cables creates a spiral orbit like DNA, canceling out magnetic flux and further reducing external noise. ●The cable features a soft PVC sheath for flexible routing. If the sheath is too hard or the cross section is not circular, preventing free bending in any direction, it can be difficult to route a USB cable on a DJ table loaded with equipment. Not only that, it can also put stress on the connector, causing damage to the USB jack on the equipment or unstable contacts during performance, resulting in problems. However, this EXFORM cable has a perfectly circular cross section and is flexible, allowing for safe routing of the cable. The highly visible sheath color ensures reliable setup, whether in a dimly lit DJ booth or during stage changes. ●Each C to A type USB connector is gold-plated to reduce conductivity loss. The durability of pure audio cables, designed for use in a carefully handled environment, is not enough for the harsh conditions of a club, and handling them can be tiring. To enhance durability in harsh environments where cables are bent, pulled, and stepped on, we've used a thick 6mm sheath to reduce stress for DJs outside of their performance. The double sheath construction, with a fluorescent yellow sheath on the outside of the white sheath, increases the thickness to 6mm, increasing strength and providing a highly visible color. ●In order to reduce the load on the contact points as much as possible, the connector cap does not use a heavy, long metal cap, but instead uses a light, compact, shock-absorbing, elastic molded cap. To reduce the burden on the environment, lead (Pb) and cadmium (Cd)-free coating is used, and lead-free solder is used in the connectors.In addition, the simple packaging is environmentally friendly, so you can use it with peace of mind. ●Made in Japan, a country trusted for its safety and security, each cable is carefully manufactured for music-loving DJs at a cable factory with over 50 years of history and know-how. *We strive to delete items promptly after they are sold in-store or via mail order, but there is inevitably a time lag when deleting items from the website. Please note that there may be cases where an item is sold out. Show more