A high-spec, multitasking noise filter that can be used in a variety of situations depending on your selection "KiNf:2e" is a multitasking noise filter that can branch your existing adapters noiselessly. It is equipped with one LINK output that passes the input directly through, and two 9.4V (9.8V no load) output terminals that pass through a noise filter. Each output uses a fully isolated circuit that is completely separate down to the ground, which also suppresses noise that can occur when mixing digital and analog effects. By using a large-capacity adapter for multi-effects, you can easily add more pedals. This is a high-spec multitasking noise filter that can be used not only on boards centered around multi-effects units, but also as a small power supply using a DC branch cable. *This product does not come with an adapter. *Please check the capacity of your adapter before use. (Devices that exceed the adapter capacity cannot be operated.) *This product consumes a large amount of power, so it has been confirmed that if the supply voltage drops even slightly below 9.0V, the connected device may not operate stably. If the supply voltage in your environment falls below 9.0V, the product may not function, so please be sure to use it with a power supply that can supply 9.0V or more even under heavy load.
