Your instrument will be carefully protected and hung on the wall like a precious piece of art. When gravity is applied, two clear polycarbonate gates appear, safely protecting your instrument from the risk of falling. 100% steel alloy frame. The hardware is also provided with a cover plate to hide the screws during installation. Can be used with headstocks up to 5cm wide. To install the hanger, drill a hole in a stud or beam, then insert a screw through the bracket. A protective TPE polymer material protects the contact point between the stand and the guitar. The head also features a gravity-activated head lock system (with panel). *The color of the product may differ slightly from the actual color. ■Installation method (1) Choose a location to install the D&ATM guitar hanger. (2) Check the position of the studs and beams in the wall, and use the holes in the mounting bracket to mark the locations where you will drill holes. (3) Insert the screws included with the product into the bracket and use a screwdriver to screw them into the wall studs or beams. (4) Attach the cover. If you can't find a stud or beam, drill holes for the anchors provided, insert the anchors into the holes, and then attach the bracket as described above. ■Installation Precautions: Please consider the installation location and method that allows screw fastening based on the building standards and regulations of your home. Also, please be mindful of electrical wires, water pipes, etc. inside the wall to avoid dangerous accidents. If you are unsure, we recommend consulting a construction company or professional.・Not suitable for fragile walls. If it falls, it may damage the wall, floor, musical instrument, etc. Please use 4-4.5mm flat head screws. Consult a hardware store or similar store for the length of screws that will fit your wall. - Make sure the two screw holes are vertical and that the guitar hanger is firmly attached to the wall without any gaps. ■Precautions for use: When hanging a guitar, please hang it carefully, taking into consideration the shape of the guitar body and head, as well as the angle of the neck. - Use only indoors.・Do not hang any instruments or other objects other than guitars on the rack. This may result in unexpected accidents or injuries. - If the mounting screws become loose, the guitar may fall, so please inspect them regularly. ■Specifications Length: 17.3cm Width: 10.6cm Depth: 14.0 cm Grip inner width: 4.9cm Screw hole spacing: 7.6cm ■ Color BLACK *There may be oil on the moving parts to prevent rust. If there is oil on any parts that come into contact with the instrument, please wipe it off before use. *The image is for illustrative purposes only. The instrument itself is not included.
