The FIRST EVER sprayable 7H Ceramic Coating! It took us years in the lab to finally be able to introduce: a sprayable ceramic coating that will rank on the 7H scale. That means you’re getting 2 years of protection and unbelievable shine while being much easier to apply than traditional small 1 oz bottles..The Science Behind The First Sprayable 7H Coating7H is a clear, non crystalline ceramic coating delivered in a solvent spray on formula. It applies a hard 7H, durable coating that is 2-3 micron thick and gives off a deep, reflective shine. The formulation is meant to provide MAXIMUM slickness in the easiest way possible. The Ultimate 3 Step Ceramic Coating KitAfter helping over 250,000 customers, we took everything we knew and put it into the simplest 3 step kit we could create.1. Prep - 8ozProper preparation is KEY to getting the best results. The better the surface is prepared, the better the 7H coating will be able to adhere. That’s why we include our premium Decontamination Soap. It’ll strip the car of any (stuff) and any previous waxes or coatings. That way your car paint will be ready for application.2. Coat - 8ozTime to apply the 7H sprayable coating. This will give you a hard 7H durable coating that’s 2-3 microns thick. You’ll get maximum slickness meaning water, dirt and other contaminants will be repelled. It’ll also protect from weather, chemical and UV rays. Best of all? You’ll get a deep, reflective shine.3. Detail - 16ozEvery car needs a refresh from time to time. That’s why we include our ‘15 Minute Detailer’ for whenever the car needs a touch up. Best of all? The detailer is formulated with ceramic to compliment the 7H Coating. That means you’ll be adding additional protection every time you detail. Instructions1. Properly wash and dry the vehicle before applying. (For best results: We recommend using our PREP soap to strip previous coatings and clay barring the vehicle to remove contaminants.)2. Ensure your surface is clean of scratches and swirl marks. We recommend using our Reverse: Scratch Remover beforehand or doing paint correction.3. Apply to a cool surface in a well ventilated area. Avoid direct sunlight. We recommend wearing gloves.4. Shake bottle. To avoid overspray, spray directly onto a microfiber applicator or towel. 5. Gently and evenly apply to the vehicle. We recommend coating 1 panel or section at a time.6. Quickly hand buff into the paint with a separate clean microfiber towel. Watch for flash and rainbowing while wiping into paint. Ensure all rainbow streaking has been wiped clear. DO NOT ALLOW TO DRY.7. Repeat the process until the entire vehicle is ceramic coated. 8. You can apply multiple coats but allow at least 5 to 10 minutes in between coats. 8. Let the ceramic coating cure for 48 hours before washing or getting wet for best results.Note: We recommend 90 days of shelf life once the bottle has been opened. Always turn the sprayer to the "off" position after each use. If the sprayer is left in the "on" position, this accelerates the curing of product in the bottle and it will not be in a liquid state.Safe on all painted surfaces, glass, headlights, tonneau covers, soft tops, chrome, trim, wheels, even bed liners!
