Masonry Wire Mesh for Single Wythe Wall Strengthen your masonry walls with our 8 ft Truss Mesh Reinforcement (also known as concrete block mesh), made from 9-gauge (3.75 mm) hot-dipped galvanized steel for superior corrosion resistance and durability. Designed to embed seamlessly into horizontal mortar joints, this reinforcement reduces cracking from thermal stresses, enhances resistance to water penetration, and increases wall elasticity. Perfect for single wythe walls, it stabilizes masonry at corners and intersections while improving lateral flexural strength. Ideal for a variety of masonry wall types, this versatile masonry wire mesh ensures long-lasting structural integrity and performance. Looking for more options? Shop all Sandbaggy Masonry Fasteners, Anchors, & Supplies Standards Compliance Code Compliant: Meets ASCE/ACI 530 and ASTM A 951 standards for masonry structures. Meets ASTM A153/A153M-B2 (1.5 oz/ft²): Hot-Dip Galvanized after fabrication. Wire (Carbon Steel): Prefabricated from cold-drawn steel wireconforming to ASTM A1064/A1064M *Please Note: Actual length is 92 inches Specs Wall Type: Single Wythe Block Size: 8" Length: 8 ft (nominal.) - actual length is 92" Width: 6" Cross Rod Length: 10" Material: Steel Finish: Hot Dipped Galvanized Wire Gauge (Side Rods): 9 Wire Gauge (Cross Rods): 9 Features Compatible with 8-Inch Blocks: Truss Mesh Reinforcement measures 92" in length and 6 inches in width, with 10-inch cross rods designed for use with 8-inch masonry blocks. Durable Construction: Made from 9-gauge (3.75 mm) hot-dipped galvanized steel for excellent corrosion and rust resistance. Reliable Masonry Bonding: Effectively bonds exterior and interior masonry wythes in composite walls while securing masonry at intersecting walls and corners. Crack Reduction: Reduces cracking caused by thermal stresses and improves resistance to water penetration. Improved Wall Strength and Flexibility: Enhances lateral flexural strength to resist bending forces and adds elasticity for greater durability. Versatile Use: A truss-type continuous length joint reinforcement ideal for single wythe walls and suitable for reinforcing a variety of masonry wall types, ensuring long-lasting structural integrity. FAQs What size concrete blocks is this truss mesh reinforcement used for? Our truss mesh reinforcement is used with 8 inch concrete blocks. What wall type is the compatible for? Used for single wythe walls, it stabilizes masonry at corners and intersections while improving lateral flexural strength. Are these code compliant? Our truss mesh reinforcement is code compliant, meeting the below standards. Code Compliant: Meets ASCE/ACI 530 and ASTM A 951 standards for masonry structures. Meets ASTM A153/A153M-B2 (1.5 oz/ft²): Hot-Dip Galvanized after fabrication. Wire (Carbon Steel): Prefabricated from cold-drawn steel wireconforming to ASTM A1064/A1064M
