8 in #12 Gutter Screw | 1/4 in Hex Head Fastener

Gutter All Verified independent store

→

8 in Length • #12 Gauge • 1/4 in Hex Head • Gutter Fastening Screw 8 in #12 Gutter Screw with 1/4 in Hex Head Fasten gutter components with extended reach, contractor-friendly hex drive engagement, and flexible quantity options for repairs, installs, and recurring fastening work. 8 in Length #12 Gauge 1/4 in Hex Head Single or 500 Count Loose Fastening Points Create the Problems Customers Notice Later A gutter run can look right on install day and still become a problem if the fastener does not reach suitable backing, the head strips during driving, or the screw choice is not matched to the hanger, fascia, or structural condition. That is when sagging sections, callback risk, and frustrating rework start showing up. This 8 in #12 gutter screw helps solve that fastening problem with extended reach, #12 gauge sizing, a 1/4 in hex head, and a corrosion-resistant finish. It gives installers a practical long gutter fastener for compatible fastening applications without making unsupported promises about universal fit, guaranteed no pre-drilling, or lifetime performance. Built for Gutter Fastening Where Reach and Driver Control Matter 8 in Extended Length The uploaded source identifies an 8 in gutter screw, giving installers extended reach for compatible fastening applications and deeper fastening plans. #12 Gauge Size The #12 gauge specification gives buyers a clear fastener size reference for gutter fastening and replacement planning. 1/4 in Hex Head The 1/4 in hex head supports driver engagement and controlled installation when paired with the correct bit and proper driver technique. Single or 500-Count Options The source lists individual screws for repairs and 500-count buckets for larger projects or contractor stocking. Best Fit Gutter fastening applications where an 8 in #12 screw is appropriate Installers fastening through compatible fascia, backing, or structural conditions Repair work replacing missing, loose, damaged, or undersized fasteners Contractor trucks and shop bins that need individual or 500-count quantity options Residential and commercial gutter projects that require long hex head screws Confirm Before Use Confirm gutter system, hanger type, fascia condition, backing depth, and screw length suitability. Use the correct 1/4 in hex driver or bit. Pre-drilling may be helpful in hard wood, edge conditions, split-prone material, or repair areas. Do not overdrive the screw or crush the gutter, hanger, fascia, or surrounding material. Use eye protection, ladder safety, and controlled driver speed. Main Description The 8 in #12 Gutter Screw with 1/4 in Hex Head is a long gutter fastener for installation, repair, and contractor fastening work where extended reach and a hex-drive head are needed. The long black screw shown in the product image includes a pointed tip, long shank, coarse threaded section, and hex head design for use in compatible gutter fastening applications. The uploaded source identifies this product as an 8 in professional gutter screw with #12 gauge sizing, a 1/4 in hex head, corrosion-resistant coating, and quantity options that include individual screws and 500-count buckets. This version preserves those supported details while removing unsupported or noncompliant claims such as Product JSON-LD, LocalBusiness JSON-LD, Breadcrumb schema, stock claims, same-day pickup claims, contractor pricing claims, old phone-number CTAs, Pacific Northwest field-tested claims, “superior” keyword stuffing, and universal performance promises. :contentReference[oaicite:1]{index=1} For gutter installers, the benefit is simple: the right screw helps the fastening plan stay consistent. An 8 in #12 hex head gutter screw gives crews a long fastener option for jobs where reach, tool engagement, and organized screw supply matter more than guessing with whatever fastener is nearby. GutterAll in Damascus, OR supports contractors and homeowners with product selection, fastener questions, in-store pickup, local delivery, and nationwide shipping through Shopify checkout. Website chat is the fastest way to confirm quantity options, fulfillment, and whether this gutter screw fits the fastening plan. Product Summary Table Product Key Specs 8 in #12 Gutter Screw with 1/4 in Hex Head 8 in #12 gutter screw with 1/4 in hex head, corrosion-resistant finish, long shank, coarse thread section, pointed tip, and individual or 500-count quantity options. The Real Win Is Fewer Guesswork Fastening Decisions Fastener problems usually show up after the work is already done: a loose section, a dipped run, a stripped head, or a screw that never reached the backing the installer expected. Starting with the right size, head type, and quantity makes the install cleaner. The 8 in length, #12 gauge, and 1/4 in hex head help crews plan the fastening work before the driver ever touches the screw. Quantity Options Option Best Use Case Why It Helps Individual Screw Small repairs, replacement fastening, and test-fit situations Lets buyers purchase only what is needed for a specific repair or small project. 500-Count Bucket Larger gutter jobs, recurring contractor use, and shop inventory Keeps long #12 gutter screws organized and ready so crews are not stopped by fastener shortages. Contractor Applications Application Use Case Why It Helps Gutter fastening Fastening gutter components where the project calls for an 8 in #12 screw Provides extended reach and a defined screw size for planned fastening work. Repair and replacement Replacing loose, damaged, missing, or undersized fasteners Gives repair crews a long hex head option when existing fasteners are not holding properly. Fascia and backing fastening plans Projects where backing depth and substrate condition need to be checked Encourages proper substrate confirmation instead of relying on a short or mismatched screw. Contractor truck supply Keeping individual screws or 500-count buckets ready for active jobs Helps avoid delays caused by running out of the right fastener size mid-project. Shop and warehouse inventory Stocking long gutter screws for project staging and crew prep Makes it easier to standardize fastener supplies across repair and install work. How the 8 in #12 Gutter Screw Works The screw is driven with a matching 1/4 in hex driver or bit through the selected gutter fastening point and into appropriate backing. The 8 in length supports extended reach, the #12 size gives a defined fastener profile, and the hex head supports controlled driver engagement. Performance depends on gutter system type, hanger or fastening point, fascia condition, rafter-tail or backing access, wood quality, screw spacing, pilot-hole decisions, driver torque, and installation technique. Confirm the fastening plan before installation, especially on older fascia, hard wood, repaired areas, or split-prone material. Product Comparison and Buying Fit Choose This Screw When The job calls for an 8 in #12 gutter fastener with a 1/4 in hex head for compatible gutter fastening work. Choose Hex Head Drive When Installers want solid bit engagement and controlled driving compared with weaker drive styles when using the proper bit. Choose a Different Fastener When The hanger, gutter system, substrate, coating requirement, screw length, gauge, or structural condition calls for a different fastener. Key Features Feature Supported Detail Contractor Benefit 8 in length Source identifies 8 in screw length Provides extended reach for compatible gutter fastening setups. #12 gauge Source identifies #12 gauge Gives contractors a clear screw size reference for fastening plans. 1/4 in hex head Source identifies 1/4 in hex head Supports controlled driver engagement with the proper bit. Corrosion-resistant finish Source identifies corrosion-resistant coating / finish Supports exterior gutter fastening use without unsupported lifetime claims. Long black screw profile Image shows long black screw with pointed tip and threaded section Helps buyers visually confirm the fastener style shown in the Shopify media. Quantity options Individual screws and 500-count bucket identified in source Supports both small repairs and contractor project stocking. Quick Decision Summary Choose this 8 in #12 gutter screw when the job calls for a long gutter fastener with a 1/4 in hex head, corrosion-resistant finish, and individual or 500-count quantity options. Confirm the gutter system, backing condition, driver setup, and fastener requirements before installation. Key Benefits 8 in length supports extended fastening reach #12 gauge gives installers a defined screw size reference 1/4 in hex head supports controlled driver engagement Corrosion-resistant finish supports exterior gutter fastening use Useful for gutter installation and repair applications Helpful for replacing loose, missing, damaged, or undersized fasteners Helps reduce stripped-head frustration when the correct bit is used Long screw profile supports deeper fastening plans where appropriate Individual screws support small repairs and test-fitting 500-count bucket supports larger projects and contractor stocking Helps crews avoid project delays from fastener shortages Fits contractor trucks, warehouse bins, and gutter installation kits Supports a more consistent fastening plan across a project Black fastener image helps buyers visually confirm product type Supported by GutterAll product guidance through website chat Product Specifications Product Name 8 in #12 Gutter Screw with 1/4 in Hex Head Product Type Gutter screw / gutter fastener Length 8 in Gauge #12 Head Type 1/4 in hex head Visible Color Black screw shown in product image Visible Profile Long shank, pointed tip, coarse threaded section, and hex head visible in image Finish / Coating Corrosion-resistant finish / coating, based on source listing Primary Application Gutter fastening and structural attachment applications where this screw size is appropriate Quantity Options Individual screw and 500-count bucket Common Applications Gutter fastening, replacement fasteners, repair work, fascia and backing fastening plans, contractor stocking, shop inventory, and residential or commercial gutter projects Primary Users Gutter installers, exterior contractors, repair crews, maintenance teams, shop users, and experienced DIY homeowners Driver Note Use the correct 1/4 in hex driver or bit and controlled driver speed / torque Compatibility Note Confirm gutter type, hanger or fastening point, backing material, fascia condition, screw length suitability, and exposure requirements before use Use Limitation Not a universal fastener for every hanger, gutter system, substrate, structural condition, screw spacing, coating requirement, or exterior environment Safety Requirement Use eye protection, proper driver control, ladder safety, and care around sharp screw points, metal edges, and overdriving risk Expected Service Life Varies by substrate, coating exposure, moisture, installation quality, driver control, fastener spacing, gutter load, backing condition, and maintenance; inspect periodically for loose fasteners, corrosion, movement, or backing failure. Fulfillment Options In-store pickup, local delivery, and nationwide shipping through Shopify checkout Who Uses 8 in #12 Gutter Screws? Gutter Installers Fastening gutter components where an 8 in #12 screw is appropriate Replacing short, stripped, missing, or loose screws Stocking service trucks with individual or 500-count quantities Exterior Contractors Planning fastener layouts on residential and commercial gutter jobs Coordinating screw length with fascia and backing conditions Keeping consistent fastener supplies ready for project staging Maintenance and DIY Users Repairing loose gutter fastening points Replacing damaged or missing fasteners where this size is appropriate Buying individual screws for smaller repairs or test fitting 10-Step Gutter Screw Installation Guide Confirm the gutter system, fastening point, and substrate are compatible with an 8 in #12 screw. Inspect fascia, backing, rafter-tail access, and existing fastener locations before driving. Mark fastening locations according to the gutter layout and job requirements. Use eye protection, ladder safety, and stable footing before starting work. Select the correct 1/4 in hex driver or bit. Position the screw squarely before driving to reduce wobble and head damage. Drive with controlled speed and pressure to avoid stripping, bending, or overdriving. Pre-drill if the substrate is hard, near an edge, split-prone, or requires a pilot hole. Check that the fastener is seated securely without crushing or distorting the gutter or surrounding material. Inspect the run for consistent support, alignment, and any loose fastening points. Contractor Tip A long screw is not a shortcut around bad backing. The best results come from matching screw length, gauge, head type, substrate condition, and driver control before the first fastener is driven. Frequently Asked Questions What is this 8 in #12 gutter screw used for? It is used for gutter fastening and repair applications when the project calls for an 8 in #12 screw with a 1/4 in hex head. Why use an 8 in gutter screw? The 8 in length provides extended fastening reach for compatible gutter setups where the installer needs a longer screw to reach suitable backing. What driver is needed for the hex head? The source identifies a 1/4 in hex head, so a matching 1/4 in hex driver or bit should be used with controlled driver speed and torque. Are these available individually or only in bulk? The uploaded source identifies both individual screw availability and a 500-count bucket option, supporting both small repairs and larger contractor projects. What is GutterAll's return policy for this product? GutterAll offers a 30-day return window for unused products in original condition. Once screws are installed, driven, damaged, modified, or exposed to jobsite wear, returns are not accepted unless the product is defective. Customers can contact [email protected] or call (503) 850-6784 to initiate a return. Refunds are processed within 5 to 7 business days. Return shipping is the buyer's responsibility unless the return is due to defect or shipping error. What shipping and fulfillment options are available? Orders ship via standard carrier to all 50 states with tracking from the Damascus, Oregon warehouse. Typical handling time is 1 to 2 business days, and typical transit time is 3 to 7 business days depending on destination. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm PST and Saturday 8am to 12pm PST. Local delivery within the Portland metro area is also available when offered through Shopify checkout. Fastener Safety and Installation Notice Fastener installation can create flying debris, sharp points, metal burrs, and driver slip hazards. Wear eye protection and use the correct driver bit. Use controlled driver speed and pressure. Overdriving can damage the screw head, gutter, hanger, fascia, or substrate. Use ladder safety and fall protection where required. Confirm the fastener is appropriate for the gutter system, backing material, exposure conditions, and project requirements before installation. Need Help Matching the Right Gutter Screw to the Job? Use website chat first for the fastest help confirming screw fit, 1/4 in hex driver needs, quantity options, pickup, local delivery, or nationwide shipping. Start With Website Chat Fastest path for product, application, quantity, and fulfillment questions. Contractor Support Useful for gutter installers, repair crews, exterior contractors, and shop inventory planning. Fulfillment Options In-store pickup, local delivery, and nationwide shipping are available through Shopify checkout. Product Summary Box 8 in #12 Gutter Screw with 1/4 in Hex Head is a long black gutter fastener with an 8 in length, #12 gauge, 1/4 in hex head, corrosion-resistant finish, and individual or 500-count quantity options. It is built for gutter installation and repair work when matched to the correct gutter system, substrate, driver setup, and fastening plan. Address GutterAll19759 SE Sunnyside RdDamascus, OR 97089 Hours Mon-Fri: 7am-4pm PSTSat: 8am-12pm PST Email [email protected] Phone (503) 850-6784 { "@context": "https://schema.org", "@type": "FAQPage", "name": "8 in #12 Gutter Screw with 1/4 in Hex Head - Frequently Asked Questions", "mainEntity": [ { "@type": "Question", "name": "What is this 8 in #12 gutter screw used for?", "acceptedAnswer": { "@type": "Answer", "text": "It is used for gutter fastening and repair applications when the project calls for an 8 in #12 screw with a 1/4 in hex head." } }, { "@type": "Question", "name": "Why use an 8 in gutter screw?", "acceptedAnswer": { "@type": "Answer", "text": "The 8 in length provides extended fastening reach for compatible gutter setups where the installer needs a longer screw to reach suitable backing." } }, { "@type": "Question", "name": "What driver is needed for the hex head?", "acceptedAnswer": { "@type": "Answer", "text": "The source identifies a 1/4 in hex head, so a matching 1/4 in hex driver or bit should be used with controlled driver speed and torque." } }, { "@type": "Question", "name": "Are these available individually or only in bulk?", "acceptedAnswer": { "@type": "Answer", "text": "The uploaded source identifies both individual screw availability and a 500-count bucket option, supporting both small repairs and larger contractor projects." } }, { "@type": "Question", "name": "What is GutterAll's return policy for this product?", "acceptedAnswer": { "@type": "Answer", "text": "GutterAll offers a 30-day return window for unused products in original condition. Once screws are installed, driven, damaged, modified, or exposed to jobsite wear, returns are not accepted unless the product is defective. Customers can contact [email protected] or call (503) 850-6784 to initiate a return. Refunds are processed within 5 to 7 business days. Return shipping is the buyer's responsibility unless the return is due to defect or shipping error." } }, { "@type": "Question", "name": "What shipping and fulfillment options are available?", "acceptedAnswer": { "@type": "Answer", "text": "Orders ship via standard carrier to all 50 states with tracking from the Damascus, Oregon warehouse. Typical handling time is 1 to 2 business days, and typical transit time is 3 to 7 business days depending on destination. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm PST and Saturday 8am to 12pm PST. Local delivery within the Portland metro area is also available when offered through Shopify checkout." } } ] } { "@context": "https://schema.org", "@type": "HowTo", "name": "How to Install an 8 in #12 Gutter Screw with 1/4 in Hex Head", "description": "A practical guide for using an 8 in #12 gutter screw with 1/4 in hex head for compatible gutter fastening applications.", "tool": [ { "@type": "HowToTool", "name": "1/4 in hex driver or bit" }, { "@type": "HowToTool", "name": "Driver or impact driver" }, { "@type": "HowToTool", "name": "Eye protection" } ], "totalTime": "PT5M", "supply": [ { "@type": "HowToSupply", "name": "8 in #12 gutter screw with 1/4 in hex head" }, { "@type": "HowToSupply", "name": "Compatible gutter fastening point or hanger" } ], "step": [ { "@type": "HowToStep", "position": 1, "name": "Confirm compatibility", "text": "Confirm the gutter system, fastening point, and substrate are compatible with an 8 in #12 screw." }, { "@type": "HowToStep", "position": 2, "name": "Inspect backing", "text": "Inspect fascia, backing, rafter-tail access, and existing fastener locations before driving." }, { "@type": "HowToStep", "position": 3, "name": "Mark locations", "text": "Mark fastening locations according to the gutter layout and job requirements." }, { "@type": "HowToStep", "position": 4, "name": "Use protection", "text": "Use eye protection, ladder safety, and stable footing before starting work." }, { "@type": "HowToStep", "position": 5, "name": "Select driver", "text": "Select the correct 1/4 in hex driver or bit." }, { "@type": "HowToStep", "position": 6, "name": "Position screw", "text": "Position the screw squarely before driving to reduce wobble and head damage." }, { "@type": "HowToStep", "position": 7, "name": "Drive with control", "text": "Drive with controlled speed and pressure to avoid stripping, bending, or overdriving." }, { "@type": "HowToStep", "position": 8, "name": "Pre-drill if needed", "text": "Pre-drill if the substrate is hard, near an edge, split-prone, or requires a pilot hole." }, { "@type": "HowToStep", "position": 9, "name": "Check seating", "text": "Check that the fastener is seated securely without crushing or distorting the gutter or surrounding material." }, { "@type": "HowToStep", "position": 10, "name": "Inspect the run", "text": "Inspect the run for consistent support, alignment, and any loose fastening points." } ] } Show more