Valve function 5/3, exhausted Actuation type Electrical Width 18 mm Standard nominal flow rate 380 l/min Pneumatic working port Sub-base size 18 mm to ISO 15407-1 G1/8 Operating voltage 24V DC Operating pressure -0.09 MPa ... 1 MPa Operating pressure -0.9 bar ... 10 bar Structural design Piston gate valve Reset method Mechanical spring Electrical actuation Degree of protection IP65 NEMA 4 Nominal width 5 mm Exhaust air function With flow control option Via throttle plate Via individual sub-base Sealing principle Soft Mounting position Any Manual override Detenting Non-detenting Type of control Pilot-controlled Pilot air supply port External Flow direction Non-reversible Symbol 00995392 Lap Overlap Signal status display LED Pilot pressure MPa 0.3 MPa ... 1 MPa Pilot pressure 3 bar ... 10 bar Flow rate of pneumatic valve on individual sub-base 390 l/min Optimized flow rate of pneumatic valve, pneumatically concatenated flow 460 l/min Optimized flow rate of pneumatic valve pneumatically concatenated flow 380 l/min Asymmetrical switching time off 30 ms for control side 14 Asymmetrical switching time on 10 ms for control side 12 13 ms for control side 14 Duty cycle 100% Max. positive test pulse with 0 signal 1500 µs Max. negative test pulse on 1 signal 800 µs Nominal operating voltage DC 24 V Coil characteristics 24 V DC: 1.6 W Surge resistance 2.5 kV Contamination level 3 Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 0 - No corrosion stress Temperature of medium -5 °C ... 50 °C Relative air humidity 0 - 90 % Noise level 85 dB(A) Ambient temperature -5 °C ... 50 °C Max. tightening torque for valve mounting 0.8 Nm ... 1.2 Nm Product weight 170 g Electrical connection 4-pin Plug as per ISO 15407-2 Type of mounting On sub-base Pilot air port 12/14 Sub-base, size 18 mm as per ISO 15407-2 Pilot exhaust air port 82/84 Ducted Not ducted Optionally: Pneumatic connection 1 Sub-base, size 18 mm as per ISO 15407-2 Pneumatic connection 2 Sub-base, size 18 mm as per ISO 15407-2 Pneumatic connection 3 Sub-base, size 18 mm as per ISO 15407-2 Pneumatic connection 4 Sub-base, size 18 mm as per ISO 15407-2 Pneumatic connection 5 Sub-base, size 18 mm as per ISO 15407-2 Note on materials RoHS-compliant Seals material FPM NBR Housing material Die-cast aluminum PA Material of screws Steel, galvanized
