FluoroPel 804A-CoFS is a fluoroacrylic solution at a concentration of 4% in a fluorosolvent. Thin films (~0.4 microns) dry in a few minutes at room temperature to a surface energy of about 10 dynes/cm, water contact angle over 110° and mineral oil contact angle over 70°. Warming to 50 to 100°C for 10 minutes will improve coverage and adhesion. Please contact Cytonix for help with product selection or with any questions. Sample volume: 150 grams (125 ml bottle)Application method: Dipping, spray, syringe-dispense, brushingApplications: Anti-Stiction, moisture repellent, oil repellent, etcCoating thickness: 300 - 400 nm Dielectric constant: 3.0 (at 1kHz, 30% relative humidity)Dielectric strength: 1000 V/mil (@ 30% relative humidity)Dry time: 60 secondsUses: Solder joints, printed circuit boards, ball grit arrays, plastic devices, glass devices, etc.Properties: Repels oils, water, hydrocarbons, silicones, photoresistsSolids percent: 4%Thermal cure time: Optional (50-100°C for 10 minutes)
