Valve function 5/3, exhausted Actuation type Electrical Valve size 26mm Standard nominal flow rate 900l/min Pneumatic working port Sub-base, size 26 mm according to ISO 15407-1 Operating voltage 24V DC Operating pressure 0.3MPa Operating pressure 3bar Structural design Piston slide with sealing ring Reset method Mechanical spring Degree of protection IP65 Nominal width 6.4mm Exhaust air function With flow control option Sealing principle Soft Mounting position Any Conforms to standard ISO 15407-1 Manual override Detenting Type of control Pilot-controlled Pilot air supply port Internal Flow direction Non-reversible Symbol 00991082 Lap Underlap Signal status display With accessories b-value 0.29 C value 3.99l/sbar Flow rate of pneumatic valve 924l/min Flow rate of pneumatic valve on individual sub-base 924l/min Optimized flow rate of pneumatic valve pneumatically concatenated flow 885l/min Switching time off 36.2ms On switching time 11.9ms Changeover time 18.9ms Duty cycle 100% Max. positive test pulse with 0 signal 2500µs Max. negative test pulse on 1 signal 1100µs Nominal operating voltage DC 24V Coil characteristics 24 V DC: 3.3 W Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 1 - Low corrosion stress LABS (PWIS) conformity VDMA24364 zone III Temperature of medium -5°C Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4] Ambient temperature -5°C Max. tightening torque for valve mounting 2.4Nm Product weight 320g Electrical connection Form B Type of mounting On sub-base Venting hole connection Not ducted Pneumatic connection 1 Sub-base, size 26 mm as per ISO 15407-1 Pneumatic connection 2 Sub-base, size 26 mm as per ISO 15407-1 Pneumatic connection 3 Sub-base, size 26 mm as per ISO 15407-1 Pneumatic connection 4 Sub-base, size 26 mm as per ISO 15407-1 Pneumatic connection 5 Sub-base, size 26 mm as per ISO 15407-1 Note on materials RoHS-compliant Seals material HNBR Housing material Wrought aluminum alloy Piston slide material Wrought aluminum alloy Material of screws Steel, galvanized
