Valve function 5/2, bistable Actuation type Electrical Width 38mm Valve size 42mm Standard nominal flow rate 1200l/min Pneumatic working port Sub-base, size 1 according to ISO 5599-1 Operating voltage 24V DC Operating pressure 0.3MPa Operating pressure 3bar Structural design Piston slide with sealing ring Degree of protection IP65 Nominal width 6.3mm Width dimension 43mm Exhaust air function With flow control option Sealing principle Soft Mounting position Any Conforms to standard ISO 5599-1 Manual override Detenting ISO code 155 Type of control Pilot-controlled Pilot air supply port Internal Flow direction Non-reversible Symbol 00991005 Lap Underlap Signal status display With accessories b-value 0.26 C value 5.91l/sbar Flow rate of pneumatic valve 1341l/min Flow rate of pneumatic valve on individual sub-base 1341l/min Optimized flow rate of pneumatic valve pneumatically concatenated flow 1313l/min Changeover time 10.5ms Duty cycle 100% Max. positive test pulse with 0 signal 2500µs Max. negative test pulse on 1 signal 1100µs Nominal operating voltage DC 24V Coil characteristics 24 V DC: 3.3 W Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 1 - Low corrosion stress LABS (PWIS) conformity VDMA24364 zone III Temperature of medium -5°C Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4] Ambient temperature -5°C Max. tightening torque for valve mounting 5Nm Product weight 400g Electrical connection Form B Type of mounting On sub-base Venting hole connection Not ducted Pneumatic connection 1 Sub-base, size 1 as per ISO 5599-1 Pneumatic connection 2 Sub-base, size 1 as per ISO 5599-1 Pneumatic connection 3 Sub-base, size 1 as per ISO 5599-1 Pneumatic connection 4 Sub-base, size 1 as per ISO 5599-1 Pneumatic connection 5 Sub-base, size 1 as per ISO 5599-1 Note on materials RoHS-compliant Seals material HNBR Housing material Wrought aluminum alloy Piston slide material Wrought aluminum alloy Material of screws Steel, galvanized
