Greco, a long-established company that began making musical instruments in the 1960s and has supported the Japanese music industry for many years to come, produces a wide variety of models, both copies and originals. Their Greco LP copies, in particular, are highly regarded and command high prices in the used market. This time, we have the "GOII-600," a cost-effective model from the "GO" series, one of the most popular original models produced by Greco. 【body】 The guitar weighs approximately 4.15 kg. The body, reminiscent of the ST model, is constructed from sen wood, mahogany, and sen wood, finished in a deep tobacco burst color (listed as "natural" in the catalog). It has the chic look characteristic of the GO series. Overall, there are scattered scratches, dents, and tarnishing on the metal parts. The control knobs and truss rod cover have been replaced. 【neck】 The mid-range GOII-600 features a set-neck joint and a maple/rosewood fingerboard neck with the same coloring as the body. The tuners are in good working order, and the winding tension is not significantly inconsistent. There is some wear on the frets and nut, but there is no extreme buzzing or dead spots, and playability is good at present. The nut width is approximately 43.8mm. It features a relatively sleek neck shape. [Electrical System] The controls consist of [front & rear volume / center volume / tone / 3-way pickup selector switch / center ON-OFF switch]. With an operation similar to adding a center pickup to a 2-pickup setup, it offers a wide variety of sounds despite its seemingly simple configuration. Accessories: Soft caseWeight: 4.15kg Body Material: Sen/Mahogany/Sen Neck Material: Maple Fingerboard: Rosewood Nut Width: 43.8mm Fret Width: 2.8mm Neck Thickness (1F/7F/12F): 21.3mm/22.9mm/24.0mm Pickup (Neck/Bridge): Greco PU-200 (9.2kΩ/9.0kΩ/8.8kΩ) *The DC resistance value of the pickup is measured through the control section. Heartman Vintage Guitars is a specialty store for vintage guitars and basses operated by Ikebe Musical Instruments.
