Product Description Product Information If you need customized services, please consult customer service for details. Technical Specifications Charge Voltage: LifePO4: N(strings) * 3.65V Discharge Current (A) 30 40 50 60 80 100 120 150 200 250 300 400 500 Discharge Overcurrent Protection Value (A) 100 ±20 160 ±30 160 ±30 220 ±40 360 ±50 360 ±50 260 ±50 260 ±50 500 ±100 500 ±100 500 ±100 1000 ±200 1000 ±200 Charge Current (A) 15 20 25 30 40 50 60 75 100 125 150 200 250 Charge Overcurrent Protection Value (A) 45 ±5 60 ±10 75 ±10 80 ±10 140 ±20 140 ±20 100 ±20 100 ±20 200 ±30 200 ±30 200 ±30 400 ±100 400 ±100 Protection Specifications Main Circuit Conduct Inner Resistance: Over charge protection Balance Voltage: Detect voltage: LifePo4: 3.75±0.05V Detect Voltage: LifePo4: 3.525V Protection Delay: 1S Release Voltage: LifePo4: 3.525VLifePo4: 3.55±0.05V Balance Current: 30±5mA Over Discharge Protection: Detect voltage: LifePo4: 2.3±0.05V Protection Delay: 1S Protection Release Condition: Off load Release Voltage: LifePo4: 2.7±0.05V Short Circuit Protection: Self Consumption Protection Condition: Short circuit of external load Working Current: 100~200mA Detect Delay: 200~500uS (Subject to actual test) Sleeping Current Over-discharge: 0uA Release Condition: Off load Temperature Range Working Temperature: Charge: -20~55℃, Discharge: -40~70℃ (Customizable) Working Temperature Range: -20~60℃ Storing Temperature Range: -40~85℃ Package Includes 1 x Battery Protection Board 1 x Cable The appearance and weight of products with different currents may vary. Please refer to the product received for exact specifications. Thank you for your understanding. Protective Board Connection Battery Wiring Important Note: Use matching cables as wire standards may vary among manufacturers. Pay attention to B- and P- marks as line colors can differ. Attention: Do not insert the cable into the BMS when welding sampling wire cable. Connect the total negative electrode B- from the fine black line. The second wire (red wire) is connected to the positive pole of the first string of batteries. Connect the positive electrode of each string of batteries in turn until reaching the last wire of the total positive B+. After connecting the cable, measure the voltage between each two adjacent metal terminals on the plug's back. Voltages should be: - Ternary lithium battery: 3.0~4.15V - Iron-lithium battery: 2.5~3.6V - Lithium titanate battery: 1.8-2.8V Connect the BMS B-line (blue thick line) to the total battery negative electrode (B-line length should not exceed 40cm). Insert the wire cable into the BMS. Post-Wiring Check if the voltage of battery B+, B- is equal to B+ and P- voltage. They should be equal for normal BMS functioning. If not, recheck the wiring configuration. Connecting the positive electrodes: Charge and discharge ends directly connect to the total positive pole B+ of the battery; same port BMS connects charging and discharging negative poles to the P- point; branch BMS connects charging negative to C-, discharge negative to P-. For any queries, please contact customer service for assistance.
