This is the "small brother" of the monster base A-100PMB. It is very similar to the A-100PMB but has only half the width (2 x 84 HP for installation of modules). Themsuitcase versions A-100P6 or A-100P9 can be positioned on top of the A-100PB because the width of the A-100PB is a bit more than the width of A-100P6/P9 and the footprint of the A-100PB is adapted to the depth of A-100P6/P9. A-100PB is equipped with one power supply (1200mA) and two bus boards. The bus boards are located in the rear area (even those for the modules that are mounted in the front row). This was necessary to take advantage of the full height of the front area for installation of A-100 modules. Measures:outside: approx. 510 (width) x 210 (height) x 420 (depth) mminside: 2 x 84 HP x 3 Uusable depth for A-100 modules front row: approx. 70 mmusable depth for A-100 modules rear row: approx. 90 mm Quantity of bus boards: 2 Weight (without modules): about 9 kg Maximum Output Current:with built-in A-100PSU2 (until about end of 2015): +12V/1200mA, -12V/1200mAwith built-in A-100PSU3 (since about early 2016): +12V/2000 mA, -12V/1200mA, +5V/4000mA
