This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation. The SN74LVCH16244ADGGR is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE) inputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. Features:Operates From 1.65 V to 3.6 VInputs Accept Voltages to 5.5 VMax tpd of 4.1 ns at 3.3 VTypical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25?CTypical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25?CIoff Supports Partial-Power-Down Mode OperationSupports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC)Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown ResistorsDatasheet Available:Texas Instruments SN74LVCH16244ADGGRTSSOP-48 package. Manufactured by Texas Instruments.A20244S
