Overview This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA?and sound reinforcement applications. Features include: selectable phantom power for electret/condenser type microphones on each input, optional VOX muting of line programs, bass and treble controls (microphone channels can be routed through tone controls or bypassed as desired), individual level controls together with master level control. A 600?/0dBm XLR balanced line output is provided, enabling connection to a maximum of 16 power amplifiers. Features 6 microphone and 2 line inputs All mic inputs are 3 pin XLR balanced Line inputs via twin RCA sockets Separate bass and treble tone controls Individual input and master volume controls Optional VOX muting of line inputs Optional phantom power for each mic input Microphone bass cut internally selectable Mic inputs routed via tone controls or bypassed 24VDC input Specifications Auxiliary No. of Channels: 2 Sensitivity (master full): 260mV Signal to Noise Ratio: better than 76dB Frequency Response (±3dB): 60Hz - 20kHz Input Impedance: 100k Ohm Muting Level: -50dB Mode: Unbalanced Connector Type: Stereo RCA Tone Control Bass Control: ±9dB at 80Hz Treble Control: ±10dB at 10kHz Bass Cut Switch on Microphone Switch ON: -6dB/Octave from 150Hz Phantom Power Voltage: 12V Output Impedance: 3.4k ohm Microphone No. of Channels: 6 Sensitivity (master full): 1.2mV Signal to Noise Ratio: better than 71dB Frequency Response (±3dB): 60Hz to 20kHz Input Impedance: 600 Ohm Mic Impedance: 200 - 600 Ohm nominal Mode: Balanced Connector Type: 3 Pin XLR Female Output Signal to Noise Ratio : (all controls mid way) -85dB, ref 0dBm (all controls maximum) -58dB, ref 0dBm Impedance: 600 Ohms Distortion: Less than 0.06% Max Output Level: +19dBm Mode: Balanced Connector Type: 3 Pin XLR Male Specifications subject to change without notice
