24 Hour 7 Day Timer With Evac Tone GeneratorA weekly timer and Evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 50 “event” switching times are available through the timing functions. Each event can be set to turn on any single day of the week or on multiple days, from 1 sec up to 24 hours. When a timing event is activated, an audio file will be played and output through the RCA line level output. There are 99 audio playback options for the timing events, which include the Bell, Prebell, Music and outputs 5-99. A Micro SD card which is supplied, houses all the audio files to be played as well as storing all the timing events. The timing events can be programmed via the unit’s front buttons or they can be programmed with the supplied PC software. The timing events can also be programmed to activate only a relay with no audio output. This is activated by setting the output to the “relay” option in the programming setup. Once activated the common 24V Out will become active. The Evacuation controller is designed around industry standard building emergency alert/evacuate requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g. fire, gas leak, bomb scare, earthquake. Alert & Evac switches on the front of the unit are fitted with safety covers to prevent accidental operation. The Alert, Evacuation and Bell tones and the cancel function are triggered by the front switches, or by the rear terminal contacts for remote activation. The Alert, Evac, Bell and Cancel functions can also be activated via remote plates or the A 4660A Paging Console. The Isolate function can be remotely activated via the A 4579 wall plate. Switched 24V DC Out connections are provided for Bell, Alert, Evac or a Common out. These contacts are for connection of override relays in remote volume controls, warning strobes, bells etc. The alert and evacuation tones are stored on the Micro SD card (Emergency Tones which conform to AS1670.4 are supplied) to allow the user to provide any tones they require. The Evacuation mode has a voice over option for the playback of an evacuation message every third cycle of the evac tone. The voice over message is also stored on the Micro SD card and is DIP switch enabled. Note: The audio files must be in MP3 format and are converted by the supplied PC software to work with the timer.Features MP3 audio format files required for Bell, Prebell and Music timing outputs Emergency Tones conform to AS 1670.4 (supplied) Random play of audio files for Prebell and Music triggers Easy PC based timing event setup Local push button operation of Alert, Evac, Bell and Isolate Remote triggering of Alert, Evac and Bell functions via closing contacts Remote triggering of Alert, Evac, Bell and Isolate functions via optional wall plates Emergency Paging (Optional via Redback® A 4660A) Voice over message (In Evacuation cycle) Switched 24VDC output for Bell, Alert or Evac mode Pluggable screw terminal connections Auxiliary level output Battery backup of current time 24V DC operation Standard 1U 19” rack mount case Suitable for any amplifier with an auxiliary input 10 Year Warranty Australian Designed and Manufactured Specifications Audio: Output Level: 0dBm Distortion: 0.01% Frequency Response: 140Hz - 20kHz Signal to noise ratio: Lockdown/Fire/Chime - 70dB typically Output Connectors: Audio Output: RCA Stereo Socket Common 24V DC Out: Screw Terminals Lockdown 24V DC Out: Screw Terminals Fire 24V DC Out: Screw Terminals Bell 24V DC Out: Screw Terminals Please Note: Output loads limited 0.12Amp each Input Connectors: 24V DC Power: Screw Terminals 24V DC Power: 2.1mm DC Jack Remote Lockdown, Fire, Bell, Cancel: Screw Terminals Muting: Via Microphone Switch Contact Controls: Lockdown/Fire: Rear Volume Voice over: Rear Volume Bell: Rear Volume Prebell: Rear Volume Music: Rear Volume Power: On/Off Switch Alert Switch: Illuminated Push Switch Evac Switch: Illuminated Push Switch Bell Switch: Illuminated Push Switch Cancel Switch: Push Switch Indicators: Power on, MP3 error, Prebell, Music, Other MP3 folders Micro SD card: 64GB Max SDHC, FAT32 MP3 File Format: Minimum 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo. General: Power Supply: 24V DC Backup Battery: 3V CR2032 Dimensions: ˜482W x 175D x 44H Weight: 2.1 kg Wallplate/paging console inputs: RJ45 8P8C Data transmission: Cat5e cabling max 300m Colour: Black *Specifications are subject to change without notice. Please Note: Online stock only for this item. Shipping at checkout for this item may be an estimate only and may apply only to some metro areas or to a specific distance from supply location. Local pickup may be available on some items by prior arrangement. Shipping charges may still apply for this item for Click and collect in store orders as this item may still need to be shipped to us for collection from the local pickup location.Please use the contact us form to get an accurate shipping quote based on your order quantity and location to avoid order cancellation charges.
