Overview A weekly timer and Lockdown and Fire Alarm controller all housed in a convenient 1RU rack mount chassis. A total of 50 event switching times are available through the timing functions. Each event can be set to turn on any single day of the week or on multiple days, from 1 sec up to 24 hours. When a timing event is activated, an audio file will be played and output through the RCA line level output. There are one 99 audio playback options for the timing events, which include the Bell, Prebell, Music and outputs 5-99. A Micro SD card which is supplied, houses all the audio files to be played as well as storing all the timing events. The timing events can be programmed via the units front buttons or they can be programmed with the supplied PC software. The timing events can also be programmed to activate only a relay with no audio output. This is activated by setting the output to the relay option in the programming setup. Once activated the common 24V Out will become active. The Lockdown/Fire controller is designed around industry standard building emergency Lockdown/Fire requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g. fire, gas leak, bomb scare, earthquake. Lockdown & Fire switches on the front of the unit are fitted with safety covers to prevent accidental operation. The Lockdown, Fire and Bell tones and the cancel function are triggered by the front switches, or by the rear terminal contacts for remote activation. Switched 24V DC Out connections are provided for Bell, Lockdown, Fire or a Common out. These contacts are for connection of override relays in remote volume controls, warning strobes, bells etc. The Lockdown and Fire tones are stored on a Micro SD card (Emergency Tones which conform to AS1670.4 are supplied) to allow the user to provide any tones they require (Note: The audio files must be in MP3 format). The Fire mode has a voice over option for the playback of a Fire message after every playback of the Fire tone. The voice over message is also stored on the SD card and is DIP switch enabled. The Lockdown mode has a voice over option for the playback of a Lockdown message after every playback of the Lockdown tone. The voice over message is also stored on the SD card and is DIP switch enabled. (Note: The audio files must be in MP3 format and are converted by the supplied PC software to work with the timer). Features MP3 audio format for Bell, Prebell and Music timing outputs MP3 audio format Emergency Tones conform to AS 1670.4 (supplied) Random play of MP3 files for Prebell and Music triggers Easy PC based timing event setup Local push button operation of Lockdown, Fire and Bell Remote triggering of Lockdown, Fire and Bell MP3 audio format Voice over message (Available in the Lockdown and the Fire cycle) Switched 24VDC output for Bell, Lockdown or Fire mode Pluggable screw terminal connections Auxiliary level output Battery backup of current time 24V DC operation Standard 1U 19 rack mount case Suitable for any amplifier with an auxiliary input 10 Year Warranty Australian Designed and Manufactured Specifications Audio Output Level: 0dBm Distortion: 0.01% Frequency Response: 140Hz - 20kHz Signal to noise ratio: Lockdown/Fire/Chime - 70dB typically Indicators: Power on, MP3 error, Prebell Micro SD Card: 64GB max SDHC, FAT32 MP3 File Format: 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo (even better as mono). Wallplate/paging console inputs: RJ45 8P8C Data transmission: Cat5e cabling max 300m Output Connectors: Audio Output: RCA Stereo Socket Common 24V DC Out: Screw Terminals Lockdown 24V DC Out: Screw Terminals Fire 24V DC Out: Screw Terminals Bell 24V DC Out: Screw Terminals Please note: Output loads limited to 0.12A each Input Connectors: 24V DC Power: Screw Terminals 24V DC Power: 2.1mm DC Jack Remote Lockdown, Fire, Bell, Cancel: Screw Terminals Controls: Lockdown/Fire: Rear Volume Voice over: Rear Volume Bell: Rear Volume Prebell: Rear Volume Music: Rear Volume Power: On/Off Switch Lockdown Switch: Illuminated Push Switch Fire Switch: Illuminated Push Switch Bell Switch: Illuminated Push Switch Cancel Switch: Push Switch General: Power Supply: 24V DC Dimensions: 482W x 175D x 44H Weight: 2.1 kg Colour: Black
