The RVM-14 monocular housing is billet machined from 7075 aircraft grade aluminum and designed to handle challenging real-world environments. The housing design accepts standard mil-spec PVS-14 lenses, or lightweight RPO lenses. The monocular features a side mounting area to accept PVS-14 accessories and mounts with a standard ¼-20 thread. Two monos can also be attached to a bridge mount (RVM-14 Bridge) in a binocular configuration with the small dovetail incorporated into the top of the housing, or the dovetail can be used with the RVM-14 Arm for single mono use. Both the Arm and Bridge are articulating to lay back against the helmet when in the stowed position. The monocular design features a rotary switch that doubles as gain adjustment. The switch initially turns the tube on at full brightness, then dims the MX-11769 image intensifier tube as the knob is rotated further. The unit includes an onboard infrared illuminator activated by a push button switch on the front of the unit. The button issurrounded by a protective fence to prevent accidental activation. Indicators on the edge of the viewing area show if the IR LED is actively on, or if the unit detects a low battery. The RVM-14 weighs 15% less than a typical single AA PVS-14 with a 50% longer battery life and has a much tougher housing. The monocular is available in Flat Black and Flat Dark Earth. The components of the monocular are media blasted to give a non-reflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the anodizing to give a tough, attractive finish. Key Features: Power Source: (1) CR123 Size Battery Focus Range: 9.8” to Infinity (and beyond) Operation Time: Approximately 75 Hours at Room Temperature Field Of View: 40 Degrees Weight: 300g with std Mil-spec optics and battery Dimensions: 2.0” X 2.6” X 4.2” IR Illuminator: Built In Water Resistance: Submersible To 66 FT IR LED & LOW BATTERY INDICATORS: YES INTENSIFIER TUBES: COMPATIBLE WITH MX-11769 STYLE OPTICS: COMPATIBLE WITH PVS-14 EYEPIECE AND OBJECTIVE WARRANTY: 5 YEARS ON HOUSING PARTS AND SERVICE PER POLICY Kit will include all of the parts required to build RVM-14 Housing Infinity collar/close focus stop with set screws Eyepiece locking collar Lenses (optional) Assembly tools, lenses and other components available, Click Here US Milspec Standard US Milspec standard lens Good balance of resolution, transmission, and flare suppression Low edge distortion RPO 3.0 Milspec+ Lightest weight lens assembly, includes lightweight diopter assembly Low Profile Excellent light transmission Good dynamic light performance and flare suppression Best center resolution and clarity US Milspec vs RPO 3.0 Comparison Available HERE Origin: Manufactured in USA
