ABB OT63F6 Switch-Disconnector Specifications: Product Type: Switch-Disconnector (Non-Fusible Disconnect Switch) Manufacturer: ABB Model: OT63F6 (Product ID: 1SCA105379R1001) Device Application: Isolation, manual switching, and disconnection in low-voltage circuits (e.g., power distribution, motor control centers) Poles Description: 6P (6 poles) Rated Operational Current AC-21A (Ie): 63 A at 380–415 V 63 A at 500 V 63 A at 690 V Rated Operational Current AC-22A (Ie): 63 A at 380–415 V 63 A at 500 V 63 A at 690 V Rated Operational Current AC-23A (Ie): 63 A at 380–415 V 45 A at 500 V 20 A at 690 V Rated Operational Power AC-23A (Pe): 11 kW at 220–240 V 22 kW at 400–415 V 22 kW at 500 V 15 kW at 690 V Conventional Free-air Thermal Current (Ith): 63 A at 40 °C Conventional Thermal Current (Ithe): 63 A (fully enclosed) Rated Operational Voltage: 750 V AC (main circuit) Maximum Operating Voltage UL/CSA: 600 V AC Rated Insulation Voltage (Ui): 750 V (IEC/EN 60664-1) Rated Impulse Withstand Voltage (Uimp): 8 kV Rated Conditional Short-Circuit Current (Inc): 50 kA with 100 A fuse at ≤415 V 100 kA with 100 A fuse at 500 V 50 kA with 80 A fuse at 690 V Rated Short-Circuit Making Capacity (Icm): 1.4 kA at 690 V Rated Short-time Withstand Current (Icw): 1.5 kA for 1 s Power Loss: 2.8 W per pole at rated operating conditions Operating Mode: Front operated Handle Type: Knob handle (handle and shaft not included) Mounting Type: Base mounting, DIN-rail mountable Position of Line Terminals: Top In – Bottom Out or Bottom In – Top Out Connection Type: Screw terminals with protected clamp Cable Cross-Section: Flexible with Ferrule: 1 x 1.5–4 mm² Solid: 1 x 1.5–6 mm² Flexible: 1 x 1.5–35 mm² Stranded: 1 x 1.5–35 mm² Wire Stripping Length: 10–12 mm Tightening Torque: 2 N·m (IEC 60947-1); 18 in·lb (UL/CSA) Recommended Screw Driver: Pozidriv 2 Degree of Protection: Front IP20 (IEC 60529) Pollution Degree: 3 Mechanical Durability: 20,000 cycles Ampere Rating UL/CSA: 60 A Horsepower Rating UL/CSA: Single Phase: 2 Hp at 110–120 V AC 7.5 Hp at 240 V AC 15 Hp at 440–480 V AC 15 Hp at 550–600 V AC Three Phase: 15 Hp at 220–240 V AC 30 Hp at 440–480 V AC 30 Hp at 550–600 V AC Standards Compliance: IEC 60947-3 UL 508 CSA C22.2 No. 14 Product Certifications: CE, cULus, RoHS (EU Directive 2011/65/EU and Amendment 2015/863), REACH, TSCA Special Features: Compact design for space-saving installation Visible contacts for safety (for 100 A and above, applicable to series) Modular design for faster installation and accessory compatibility Knife contact solution for low power loss and heat Dimensions: Width: 105 mm Height: 91.5 mm Depth/Length: 84.5 mm Weight: 0.6 kg HS Code: 8536.50.80 Country of Origin: Finland
