ABS-GF

INNOADDI Verified independent store

→

Product Features Enhanced Strength and Stiffness Greater Dimensional Stability Fine Matte Finish Durability and Water Resistance Comes with High Temperature Reusable Spool Diameter : 1.75 mm +/- 0.03 mm Cautions for Use 0.2 mm Nozzle Not Compatible Enclosure Printers Required AMS Compatible AMS lite NOT Compatible Dry Out Before Use Note: Before printing, please kindly refer to the Printing Tips for optimal results. ABS-GF Green and Yellow have been discontinued and will not be restocked. Bambu ABS-GF Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors. Enhanced Strength and Stiffness ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts. ABS ABS-GF Improvement % Stiffness (Bending Modulus - XY) 1880 MPa 2860 MPa 52.1% Strength (Bending Strength - XY) 64 MPa 68 MPa 6.3% Layer Strength (Bending Strength - Z) 39 MPa 46 MPa 17.9% Heat Resistance (HDT, 0.45 MPa) 87 °C 99 °C 13.8% Greater Dimensional Stability Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components. Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25% Fine Matte Finish The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts. Water Resistance & Built to Last With improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds. Accessory Compatibility Recommended Not Recommended Build Plate Smooth PEI Plate, Textured PEI Plate Cool Plate SuperTack Hotend Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm Hotend with Stainless Steel Nozzle All Size Glue Bambu Liquid GlueGlue Stick / ABS-GF Hex Code Table Color Hex Code Display White #FFFFFF Gray #C6C6C6 Yellow #FFE133 Orange #F48438 Red #E83100 Green #61BF36 Blue #0C3B95 Black #000000 Parameters Comparison Learn more different filaments comparison on Bambu Filament Guide >> ABS ABS-GF PA6-GF Composition Acrylonitrile - butadiene - styrene Acrylonitrile - butadiene - styrene,glass fiber PA6, glass fiber AMS Compatibility YES YES YES Dry Out Before Use Recommended Recommended Required Printing Speed < 300 mm/s < 180 mm/s < 130 mm/s Printer Type Enclosure Enclosure Enclosure Toughness (Impact Strength - XY) 39.3 kJ/m² 14.5 kJ/m² 27.2 kJ/m² Strength (Bending Strength - XY) 62 MPa 68 MPa 120 MPa Layer Strength (Bending Strength - Z) 39 MPa 46 MPa 51 MPa Stiffness (Bending Modulus - XY) 1880 MPa 2860 MPa 3670 MPa Layer Adhesion (Impact Strength - Z) 7.4 kJ/m² 5.3 kJ/m² 4.1 kJ/m² Heat Resistance（HDT, 0.45 MPa) 87 °C 99 °C 182 °C Saturated Water Absorption Rate/%（25 °C, 55% RH） 0.65 0.53 2.56 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 80 °C, 8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 240 - 270 °C Bed Temperature (with Glue) 80 - 100 °C Printing Speed < 180 mm/s Physical Properties Density 1.08 g/cm³ Vicat Softening Temperature 103 °C Heat Deflection Temperature 99 °C Melting Temperature 202 °C Melt Index 7.56 ± 1.4 g/10 min Mechanical Properties Tensile Strength 36 ± 3 MPa Breaking Elongation Rate 6.3% ± 1.2% Bending Modulus 2860 ± 130 MPa Bending Strength 68 ± 4 MPa Impact Strength 14.5 ± 1.5 kJ/m² Downloads Filament TDS Filament MSDS Filament RoHS Printing Tips • Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality. • To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI. • Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers. What's in the Box Filament with Spool*1 & Desiccant*1 Package*1 Show more