ABS Kevlar Filament

3

3d4makers-com.myshopify.com Verified independent store

→

ABS Kevlar Filament ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials. The aramid fibers assuring dimensional stability ,pre venting the printed object to warp and even make the printed object lighter than regular ABS. Light weight object. ABS Kevlar density is 1.037 g/cm³ compared to 1,05 g/cm3 for our regular ABS. Smooth surface. No shrinkage / dimensional stability. Low Warping. ABS Kevlar Material Properties Density 1.05 g/cm³ Tensile Strength at Yield 35 MPa Tensile Strength at Break 30 MPa Charpy impact strength (unnotched) 14 kJ/m2 Charpy impact strength (notched) 6.1 kJ/m2 Elastic modulus (1 mm/min) 2350 MPa HDT 0.45 MN/m2, annealed 88°C HDT 1.81 MN/m2, annealed 75°C VICAT Softening point 95°C Print Settings Print Temperature: 260°C (250-270 °C). Bed Temperature: 100°C Print Speed: 50 mm/s TDS You can find the Techincal data sheet for ABS Kevlar Filament here. MSDS You can find the Material Safety Data Sheet for ABS Kevlar Filament here. *Our ABS Filament is also available in ABS ESD Filament. Show more