The innovative Abyzz A400 pump with its titanium impeller consists of powerful and programmable, menu-controlled, electronic driver and a sinusoidal, three-phase synchronous motor (pump). The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps. The menu controlled driver and motor run on an mere 12V and because of that it can be used in a myriad of applications. The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations. The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards. This product was developed and is manufactured in Germany by Venotec. Features Variable speed range (0 - 100%) MCFS® (Menu Controlled Flow Sequencer) for random, wave etc. BOOSTMODE® integrated Comprehensive safety functions (e.g. dry run, temperature sensor, and overload protection) Soft startup Bus-enabled interface for peripheral devices Lockable plug contacts Low-noise operation Operating Voltage: 12V BOOSTMODE® max flow rate: 6,060 gph / 25,000 lph Normal mode max flow rate: 4,800 gph / 18,600 lph Discharge flow speed: max 7,5 m/s , nominal 6.4 m/s Delivery height: max. 30.55 ft / 9,4 m Rated input: 4W-400W Input voltage: 110V~ @ 60Hz Operating Voltage: 12V Ambient temperature range for operation: 35.5°F - 104°F / +2°C - 40°C Maximum operating pressure: 17.40 psi / 1,2 bar Maximum immersion depth: 6.5 ft / 2m Pump cable length: 32.5ft / 10m Inlet/outlet connections: 50mm/40mm (suitable for PVC/ABS adhesive fittings) In the Box: Abyzz A400 pump and 110V 60hz driver Power cable: 5ft / 1.5M Driver/Controller connecting cable: 6.5 ft / 2 meters Operating manual
