Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to wrap around every edge and recessed area of your vehicle with ease. Gloss Metallic also uses a safe solvent polyacrylate adhesive, which is easy to install and gentle on car paint. Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). 18m roll. The thickness of the film: 0.16mmThe thickness of film with release liner: 0.32mmType of film: High grade polymeric multilayered calendared vinyl film with air release channels Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with a double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°C to +25°C, usage from -55°C to +65°C Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps Cure time: 24 hours above 10°C Aftercare: PH neutral, Avoid wax or solvents Directional: No Tools: soft squeegees with buffers
Related
Related