Tile & Grout Cleaner LF Low foam tile cleaner and degreaser Product Description Tile & Grout Cleaner LF is an ultra low-foaming, high-performance cleaner designed for use with hard surface cleaning equipment. Formulated with advanced nano-surfactant chemistry, it delivers superior soil release and deep penetration—effectively removing grease, fats, grime, and general build-up from tiles, stone, concrete, and grout. Ideal for kitchens, malls, dining areas, and large commercial or public spaces, Tile & Grout Cleaner LF addresses the challenge of cleaning heavily soiled surfaces without leaving residue or causing foam-related equipment issues. Its mildly alkaline formula ensures consistent, powerful results while maintaining safety across a wide range of surfaces. pH 12 DilutionLight Soiling: 1:100 - 1:200 (5ml-10ml/1Lt) | Heavy Soiling: 1:4 - 1:10 (90ml-200ml/1Lt)Fragrance : SandalwoodColour : MauveSurfaces : Natural Stone, Ceramic & Porcelain, Concrete & Masonry, Rubber, Timber Benefits Professional Choice: Effective maintenance and deep cleaning solution for all tile, stone, concrete, and grout surfaces. Ultra Low Foaming: Minimises foam to protect vacuum motors in cleaning machines. Smart Cleaning Power: Utilises advanced nano surfactant chemistry for optimal soil penetration and removal. Tile Smart: Ensures a “minimum residue” clean to prevent discolouration from residue build-up, making it ideal for maintenance cleans. Safety First: An alkaline detergent that is not classified as dangerous goods, making it safer to use and transport. Application areas and surface suitability Safe and ideal for use on all man-made tiles, natural stone products, clay products, concrete and grout. Avoid contact with non-ferrous metals, plated metals, painted surfaces and flooring which is coated with an acrylic polymer or wax. Ideal for use anywhere there are dirty tiles, concrete, stone or resilient flooring. Especially good in kitchens, dining areas, malls and large commercial areas. Excellent for the maintenance cleaning of commercial and public areas. How to use Read and understand the SDS before use.Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Dilutions Deep clean applications: Mix 1 part Tile & Grout Cleaner LF with 4 to 9 parts water. (Hot water will enhance the chemical action). Standard cleaning applications: Mix 1 part Tile & Grout Cleaner LF with 50 to 100 parts water. Application Heavy duty use: Apply the solution with a clean mop & bucket, autoscrubber or rotary scrubber solution tank. Apply to a limited area at a time. Do not allow solution to dry. Scrub thoroughly with an applicable nylon scouring floor pad or brush. Allow 10 to 30 minutes dwell time. Re-agitate areas of stubborn soiling. Extract/Pick-up resultant slurry with professional tile extraction equipment and rinse thoroughly with clear water. Maintenance use: Follow standard cleaning techniques. No clear water rinse is needed when using at 1:100. Ideal for use through autoscrubbers and similar cleaning equipment.
