Actuator Pin and O-Ring Replacement Pack Designed for use with the Aero-Etch Sandblasting Chamber when powered by the Aero-Etch Aerosol Propellant. Keep your system running smoothly with secure and reliable replacements. What's Included: 3 Actuator Pins 3 O-Rings Installation Instructions Insert the Actuator Pin into the threaded brass insert on the bottom of the chamber, ensuring the pin points outward. Place the O-Ring over the pin to secure it in position. Check the Fit: Confirm both parts are firmly in place and aligned to connect with the aerosol canister’s threaded valve head. Operation Tips Activate and Deactivate Slowly Always turn the canister slowly when activating or deactivating to allow the chamber to pressurize or depressurize gradually. This prevents sudden pressure changes that could damage the system. During Activation Avoid sudden bursts of pressure when starting. A rapid rush of air can clog the nozzle. ⚠️ If clogging occurs, deactivate the canister, use the nozzle pin to clear the blockage, and restart. During Deactivation Slowly depressurize the system when turning off. A quick release of air can cause the Actuator Pin and O-Ring to be ejected. ⚠️ If this happens, simply reinsert the pin and O-ring securely before resuming use. Need Help? We're here to help! Contact Us: [email protected]
