[shortdesc] Converged Access Gateway Base Unit 16-port channelized T1/E1 MIC Channelized E1 down to DS0 RJ48 connector for ACX4000 Supported on Fortius-M only [/shortdesc] [properties] Properties Juniper ACX-MIC-16CHE1-T1-CE Description 16-port channelized T1/E1 Modular Interface Card with RJ48 connector for Juniper ACX4000 Series, supporting channelized E1 down to DS0. Supported on Fortius-M only. Product Family ACX4000 Series Product Type Modular Interface Card Ports 16 E1 or T1 portsPer-MIC E1/T1 framingDS1 channelization per MIC:- 1 DS1 channel- 24 DS0 channelsE1 channelization per PIC:- 1 E1 channel- 32 DS0 channels Weight (lb/kg) 1.57 lb (0.71 kg) Power requirement 2.21 A @ 12 V (26.55 W) [/properties][specifications] Specifications Juniper ACX-MIC-16CHE1-T1-CE Software Features Full bit error rate test (BERT)DS1 and E1 interfaces are selectable on a per-port granularityPer-port framing is not supportedYou can configure the following framing modes using the CLI:- T1SF, ESF, D4/superframe, ESF (extended superframe)- E1G704, G704no-crc4, unframedLocal, remote, and per-port loopback diagnosticsEncapsulations:- Pseudowire Emulation Edge to Edge (PWE3) Architecture (RFC 3985)- Requirements for Pseudowire Emulation Edge to Edge (PWE3) (RFC 3916)- Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553)- Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet-Switched Network (CESoPSN) (RFC 5086)- Pseudowire Emulation Edge to Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) Operating temperature -40° to 149° F (-40° to 65° C) Humidity 95% RH noncondensing Safety Approvals CAN/CSA-C22.2 No. 60950-1UL 60950-1EN 60950-1IEC 60950-1CB SchemeEN 60825-1 EMC AS/NZS CISPR22 Class AEN55022 Class AVCCI Class AFCC Part 15 Class AIECS-003 Issue 4BSMI CNS 13438 and NCC C6357 Taiwan Radiated EmissionsKN 22, Class ACISPR 32/EN55032: 2012 European Radiated Emissions Class AEN-61000-4-6 Low Frequency Common ImmunityEN-61000-4-11 Voltage Dips and SagsCISPR 24/EN55024 Information Technology Equipment Immunity Characteristics ETSI (European Telecommunications Standardization Institute) EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility RequirementsETSI EN 300 019-2-1 (2000) Storage, Class T1.2ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment NEBS SR-3580 NEBS Criteria Levels (Level 3 Compliance)GR-63-CORE: NEBS, Physical ProtectionGR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant)GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) Telecomm Compliance T1 and XDSL Interfaces FCC Part 68 (T1 Only)Industry Canada CS-03JATE Green BookE1 Interface TBR 12/13ACA TS016G.703RTTE Directive 1995/5/ECDevice management: NETCONF, CLI, SNMP v1/v2/v3End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS)Device and service-level fault managementDevice and service-level performance management Metro Ethernet Forum (MEF) MEF CE2.0 compliant [/specifications] Juniper ACX-MIC-16CHE1-T1-CE Modular Interface Card Juniper ACX-MIC-16CHE1-T1-CE is a 16-port channelized T1/E1 Modular Interface Card designed for the Juniper ACX4000 Series. It supports channelized E1 connectivity down to DS0 through an RJ48 interface, making it suitable for metro and access network deployments that require flexible circuit-based service delivery. This MIC is supported on Fortius-M only.
