[shortdesc] ACX500 Indoor Unit 2 x 1GE (SFP) 4 x 1GE (Combo) with single DC power supply 1 RU Temperature hardened Passive Cooling Rack mounting options (mounting kits sold separately) PoE support Junos [/shortdesc] [properties] Properties Juniper ACX500-DC Description ACX500 indoor unit 2x1GbE (SFP) + 4x1GbE (combo) with single DC power supply, 1 U, temperature hardened, passive cooling, rack mounting options, PoE support, Junos OS Product Family ACX500 Series Product Type Router Built-In Interface Options GbE (combo) 4 (PoE+ support on 3 ports) GbE (SFP) 2 Console port RJ-45 connector Management Ethernet port RJ-45 connector Dimension (WxHxD) 17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 24 cm) Weight (lb/kg) fully configured 8.6 lb (3.9 kg) Power -48 V nominal or -60 V telco nominal or +24 VDC nominal Maximum power draw 65 W + PoE power (80 W) Rack Unit 1 U [/properties][specifications] Specifications ACX500-DC System Throughput Up to 60 Gbps Operating temperature -40° to 149° F (-40° to 65° C) Humidity 95% RH noncondensing Platform Features Layer 2 IEEE 802.3 bridgingIEEE 802.1qIEEE 802.1ad (Q-in-Q)VLAN id manipulation for outer/inner: swap/pop/pushRapid Spanning Tree Protocol (RSTP)/VLAN Spanning Tree Protocol (VSTP)/Multiple Spanning Tree Protocol (MSTP)Link Aggregation Control Protocol (LACP)Enhanced load balancing based on L2-L4 header infoLink Layer Discovery Protocol (LLDP)Layer 2 bridge protocol data unit (BPDU) tunneling/MAC rewrite Layer 3 IPv4IPv6RPFEqual-cost multipath (ECMP)Enhanced load balancing based on L2-L4 header infoOSPFIS-ISBGPIndirect/composite next hop MPLS and Seamless MPLS RSVPLDPPath Computation Element Protocol (PCEP)RSVP-TEBGP-LU LDP-RSVPRSVP fast reroute (FRR) Services IEEE 802.3 bridge domainPWE (T-LDP)L2VPN (BGP)Layer 3 VPNIntegrated routing and bridging (IRB)Stateless filters L2-L4 Class of Service (CoS) 8 queues per port with schedulers and shapingClassification based on 802.1p, DiffServ code point(DSCP), IP-precedence, Exp bitSingle-rate policer ingress/egressTwo-rate three-color policer ingress/egressPer-Port Egress Shaping OAM and SLA Management Bidirectional Forwarding Detection (BFD)Connectivity fault management (CFM)Y.1731RFC2544TWAMP Multicast Protocol Independent Multicast (PIM)Internet Group Management Protocol (IGMP)IGMP snooping Timing and Sync BITS/1pps/10MHz1588v2 BC1588v2 over IP1588v2 over EthernetSynchronous EthernetHybrid modeEmbedded GM Security L2 storm controlIPsec NAT Configuration, Management and Automation CLINETCONFNMP v2/v3SLAX/Python on-box scripting toolsZTDYANG Safety Approvals CAN/CSA-C22.2 No. 60950-1UL 60950-1EN 60950-1IEC 60950-1CB SchemeEN 60825-1 EMC AS/NZS CISPR22 Class AEN55022 Class AVCCI Class AFCC Part 15 Class AIECS-003 Issue 4BSMI CNS 13438 and NCC C6357 Taiwan Radiated EmissionsKN 22, Class ACISPR 32/EN55032: 2012 European Radiated Emissions Class AEN-61000-4-6 Low Frequency Common ImmunityEN-61000-4-11 Voltage Dips and SagsCISPR 24/EN55024 Information Technology Equipment Immunity Characteristics ETSI (European Telecommunications Standardization Institute) EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility RequirementsETSI EN 300 019-2-1 (2000) Storage, Class T1.2ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3ETSI EN 300 019-2-3 (2003) Stationary Use at Weather Protected Locations, Class T3.2ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment Other EMC Requirements IEEE 1613 Class 2 Environmental and Testing Requirements for Communications NetworkingDevices in Electric Power SubstationsIEC 61850-3 Communication networks and systems for power utility automationEN50121-4 Railway applicationsETSI EN 300 440-1/-2 GPS spurious emissionDeutsche Telekom 1TR9 (2008) EMC SpecificationBritish Telecom EMC Immunity Requirements (2007)ITU-T K.21 (2011) Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrentsITU-T K.20 (2011) Resistibility of telecommunication equipment installed in telecom centers to overvoltages and overcurrents NEBS SR-3580 NEBS Criteria Levels (Level 3 Compliance)GR-63-CORE: NEBS, Physical ProtectionGR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant)GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) Telecomm Compliance Device management: NETCONF, CLI, SNMP v1/v2/v3End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS)Device and service-level fault managementDevice and service-level performance management Metro Ethernet Forum (MEF) MEF CE2.0 compliant [/specifications][accesories] Accessories PKG-1U-ACXS Package Spare for ACX 1RU Chassis RACK-MNT-1RU-19-S ACX Series 1 RU 19" Mounting Bracket" RACK-MNT-1RU-23-S ACX Series 1 RU 23" Mounting Bracket" CBL-PWR-C15M-HITEMP-US Power Cord, AC, C15M Licenses ACX500-LIC-GPS ACX500 license to activate GPS receiver ACX500-LIC-SEC ACX500 license to activate IPsec and NAT features [/accesories] Juniper ACX500 is a small form factor, hardened fanless router that delivers up to 6 Gbps throughput. It comes with an integrated software-enabled GPS receiver and supports a rich set of security, timing, and synchronization features. Additionally, ACX500 has been certified for indoor and outdoor use for utilities and railways. It is ideal for small cell, LTE-Advanced mobile backhaul deployments, as well as use cases in the industrial environment.
Related
Related
Related
Related