⚠️ SAFETY WARNING — READ BEFORE USENever leave a baby or child unattended in or near water — not for a moment, not for any reason. Set the stand on a flat, dry, level surface and verify it is fully locked and stable before every single use. What It Is An adjustable, foldable bath stand that holds an infant bath tub at a comfortable working height — so the adult is not kneeling on a hard floor for the whole bath routine. The frame adjusts to fit different tub and basin setups and folds flat for storage. Non-slip TPR foot pads grip the floor to keep the frame steady throughout use. Dimensions Open (assembled): Approx. 70 cm × 40 cm × 70–85 cm (L × W × H) — height adjustable across multiple positions Folded: Approx. 70 cm × 40 cm × 10 cm — slim enough to slide behind a door or into a cabinet gap Compatible Tub / Basin Size Fits standard infant bath tubs and basins 55–72 cm in length and 30–40 cm in width Basin must rest securely within the four support arms with at least 2 cm of contact on each side Bath tub / basin not included Weight & Age Limits Maximum child weight: 15 kg (33 lb) Recommended age range: Newborn to 18 months, or up to the weight limit — whichever comes first Developmental note: Designed for pre-walking infants who cannot sit unsupported. Discontinue use when the child begins to pull up, stand, or attempts to climb out of the tub. Materials Frame: Powder-coated carbon steel — rust-resistant, wipe-clean surface Tub-support arms (contact surfaces): BPA-free PP plastic with soft EVA padding; no sharp edges or exposed metal where the bath rests Non-slip feet: TPR (thermoplastic rubber) — grips flat, dry, hard-floor surfaces. Not suitable for use on wet tile without a separate anti-slip mat beneath the feet. Assembly & Locking Steps Unfold the stand until both side rails click audibly into the open position. Set all four feet flat on a level, dry surface. Slide the height-adjustment collar to the desired position and tighten the locking knob firmly clockwise until it does not turn further. Place the infant bath inside the four support arms; confirm the basin does not rock or shift. Before placing the child, apply light downward pressure to each corner of the basin to verify the stand does not wobble. To fold for storage: Remove the basin → loosen the locking knob → press the release tabs on both side rails simultaneously → fold the stand flat. Included Parts 1 × Adjustable bath stand frame (pre-assembled, tool-free setup) 4 × Attached non-slip TPR foot pads 1 × Height-adjustment locking knob 1 × Instruction sheet (EN / FR / DE / ES) Cleaning Instructions Wipe the frame and plastic contact arms with a damp cloth and mild soap after each use. Do not submerge, spray directly with a hose, or place in a dishwasher. Dry thoroughly before folding for storage to prevent moisture build-up at the hinge points. Inspect rubber feet and locking knob monthly; replace if worn, cracked, or loose. Warranty 12-month manufacturer's warranty against defects in materials and workmanship under normal domestic use. Warranty does not cover damage from exceeding the stated weight limit, commercial use, modification, or improper assembly. Contact GiftMira support with your order number to initiate a claim. Who It Suits New parents setting up a first bathroom routine, families in apartments where nothing gets left out permanently, and anyone buying for a baby shower who would rather give something used every single day than something photographed once.
Related
Related
Related
Related