The drone does not do the work. The drone carries the nozzle to height. The ground system does the work. The Adjustable Pivot Adaptor is a brass hinged coupling that sits between the lance and the nozzle and lets the operator set the spray angle by hand instead of carrying a set of fixed-angle wands. Loosen, swing to the working angle, lock. It solves the case a bent wand cannot: surfaces whose angle changes as the work progresses up a facade. Key benefits Replaces a set of fixed wands. One part covers the angles a rack of bent wands would otherwise be needed for. Adjust in the field. The angle is set by hand at the point of work, not chosen before the lift. Quick connect both ends. Inserts into an existing line without adapters. Brass body. Corrosion-resistant under chemical injection and hard water. Mechanical only. No electronics, no calibration, nothing to fail at height. Stackable. Combines with the Angled Extension Wand where reach and angle are both required. How it works The adaptor is built as two brass halves joined on a sealed hinge with a locking collar. Released, the outlet swings through its range; tightened, it holds the set angle under working pressure. Connect: Fit the adaptor inlet to the lance outlet via the quick-connect coupling. Set: Release the collar, swing the outlet to the required angle, retighten. Verify: Bring the system to pressure and confirm the joint holds before working. Specifications Adjustment Product type Adjustable pivoting high-pressure adaptor Pivot range TBC Locking method Threaded collar Connection & rating Inlet 1/4" quick connect Outlet 1/4" quick connect Max. working pressure 250 bar (3,625 PSI) Max. temperature TBC Materials & supply Body material Brass Seals TBC Country of origin China HS code TBC — pending customs classification What’s included 1 × Adjustable Pivot Adaptor with 1/4" quick-connect inlet and outlet Before you deploy Retighten before every pass. A pivot that is not fully locked will drift under working pressure and change the point of impact mid-pass. Reaction force. Any angled outlet produces a turning moment at the coupling. On a drone-mounted lance, verify handling at low pressure first. Seal wear. The hinge seal is a wear item under chemical duty. Rinse with clean water after alkaline or acid injection. Nozzle not included. The nozzle is a separate item. Frequently asked questions What does an adjustable pivot adaptor do?It sits between the lance and the nozzle and lets the operator set the spray angle by hand, then lock it, instead of swapping between fixed-angle wands. What are the connections?1/4" quick connect at both the inlet and the outlet. What pressure is it rated for?250 bar (3,625 PSI) maximum working pressure. Can I use it together with an extension wand?Yes. The wand provides reach and the adaptor provides an adjustable angle; they are commonly used together. Does the angle hold under pressure?It holds when the locking collar is fully tightened. Retighten and verify at low pressure before each working pass. Ordering & identification SKU WD-L2-PVA-STD HS code TBC Country of origin China Shipping and customs duties are not included.
