Not just a simple radio interface. We use the latest electronic technology to enable us to produce an efficient powered radio interface, with very low power consumption typically only 6mA, and all the features a pilot would require.User-Configurable FeaturesChange various selectable features which reconfigure radio type (i.e. from type 'B' [Icom A3] to Type 'BB' [Icom A6]), control intercom volume levels, mute audio levels, and more.Crystal Clear AudioThe voice reproduction through the intercom unit is very bright and clear, optimised for noisy environments. Connection to the mobile telephone is equally as clear. Audio and mic gain levels can be configured dependent upon what telephone or second radio you are connecting.Five LED Status MonitorsFully specified with LED indicators showing power, TX, RX and headset batteries charged.Connectivity Connect an airband radio (panel mount or handheld) Second PMR type radio can be connected at the same time for chatting to your flying group Mobile telephone connection is a standard feature (lead is optional accessory, MM011) Two audio/music inputs and separate audio output for recording Twin PTT inputs - when P1 transmits the mic on P2 will mute and vice versa Power & Configuration User can select either 10v (Icom A6 etc) or 12 volt (Icom A3 etc) output to power the radio User adjustable maximum intercom volume level and adjustable maximum mic TX level Music, second radio, mobile telephone will mute automatically once the master radio receives an incoming signal Auxiliary Control output for two colour LED on the instrument panel showing RX and TX (optional accessory) Smart Battery ManagementThe interface incorporates a battery monitor that turns the battery charging circuit off when headsets are fully charged, extending the life of the headset batteries. There is a tone bleeper when you first press the PTT switch to indicate the radio transmission.CompatibilityOur equipment can be connected to a Lynx Micro System or vice versa.*Interface will not provide voltage to Icom A25.Inputs/Outputs Connect up to two radios at once Mobile phone input Twin PTT Hi Stereo Music Input (PCAS/Music/GPS audio) Low Audio input (PCAS/Music/GPS audio) Line out recording Output Auxiliary LED indicator Powers radio from the interface Features Micro Amp power - Typically 3mA per headset connected when using main supply Switchable 10v or 12v output for all Icom radios Automatic soft audio muting circuit - Mutes second radio, music, & telephone when the master radio receives a transmission User adjustable TX mic gain & EQ adjuster, intercom max volume adjuster, muting sensitivity LED Indicators Pilot headset batteries full charge indicator Co Pilot headset batteries fully charged indicator RX LED TX LED Ignition power on Included Radio Interface unit Ignition Power supply lead Stereo Audio input/output lead Fixing Kit The interface comes pre-configured and ready to plug and go.
Related
Related
Related
Related