Features Wide frequency range from 1uHz to 80/50MHz High 200MSa/s sampling rate 16-bit Amplitude Resolution Output from any section of 1M-point-long waveform 4.3" high resolution LCD display/on-screen help/Impedance switch Four ways to generate arbitrary waveform: Front Panel Operation CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary Waveform Editing PC Software USB, RS-232, GPIB interface support The AFG-3000 Series is arbitrary waveform generator designed for industrial, scientific research and educational applications. The series comes in bandwidths of 80MHz (AFG-3081) and 50MHz (AFG-3051) with built-in multiple standard waveforms to meet users' diversified needs. The AFG-3000 Series also provides a high 16 bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG-3000 via USB host, allowing users to edit waveforms and enhance measurement efficiency. AFG-3081 AFG-3051 Waveforms Sine, Square, Ramp, Pulse, Noise, DC, Sin(x)/x, Exponential Rise, Exponential Fall, Negative Ramp Arbitrary Waveforms ARB Function Built in Sample Rate 200 MSa/s Repetition Rate 100MHz Waveform Length 1M points Amplitude Resolution 16 bits Non-Volatile Memory Ten 1M waveforms(1) User define Output Section Any section from 2 to 1M points User define Mark Output Any section from 2 to 1M points Frequency Characteristics Range Sine 80MHz 50MHz Square Triangle, Ramp 1MHz Resolution 1uHz Accuracy Stability ±1 ppm 0 to 50℃ ±0.3 ppm 18 to 28℃ Aging ±1 ppm, per 1 year Tolerance ≦ 1 uHz Output Characteristics(2) Amplitude Range 10 mVpp to 10 Vpp( into 50Ω) 20 mVpp to 20 Vpp(open-circuit) Accuracy ± 1% of setting ±1 mVpp(at 1 kHz,>10 mVpp) Resolution 0.1 mV or 4 digits Flatness ± 1% (0.1dB) ± 2% (0.2 dB) 10 MHz to 50 MHz ± 10% (0.9 dB) 50 MHz to 70 MHz± 20% (1.9 dB) 70 MHz to 80 MHz (sinewave relative to 1 kHz) Units Vpp, Vrms, dBm, Offset Range ±5 Vpk ac +dc (into 50Ω)±10Vpk ac +dc (Open circuit) Accuracy 1% of setting + 2 mV+ 0.5% of amplitude Waveform Output Impedance 50Ω typical (fixed)> 10MΩ (output disabled) Protection Short-circuit protectedOverload relay auto-matically disables main output SYNC Output Level TTL-compatible into>1kΩ Impedance 50Ω nominal Sinewave Characteristics Harmonic Distortion(5) –60 dBc DC～1 MHz, Ampl＜3 Vpp–55 dBc DC～1 MHz, Ampl＞3 Vpp–45 dBc 1MHz～5 MHz, Ampl＞3 Vpp–30 dBc 5MHz～80 MHz, Ampl＞3 Vpp Total Harmonic Distortion < 0.2%+0.1mVrmsDC to 20 kHz Spurious (non-harmonic)(5) –60 dBc DC～1 MHz –50 dBc 1MHz～20MHz –50 dBc+ 6 dBc/octave 1MHz～80MHz Phase Noise ＜-65dBc typical 10MHz, 30 kHz band＜-47dBc typical 80MHz, 30 kHz band Square wave Characteristics Rise/Fall Time (3) Overshoot < 5% Asymmetry 1% of period+1 ns Variable Duty Cycle 20.0% to 80.0% ≦ 25 MHz 40.0% to 60.0% 25～50MHz 50.0%(Fixed) 50～80MHz Jitter 0.01%+525ps ＜ 2 MHz0.1%+75ps ＞ 2 MHz Ramp Characteristics Linearity ＜ 0.1% of peak output Variable Symmetry 0% to 100% Pulse Characteristics Period 20ns～ 2000s Pulse Width 8ns～ 1999.9s Minimum Pulse Width: 8nS when FREQ≦50MHz 5% of setting period when FREQ≦6.5MHz Resolution: 1nS when FREQ≦50MHz 1% of setting period when FREQ≦6.5MHz Overshoot 100 ns Input Impedance 10kΩ,DC coupled Latency Sweep < 10 us (typical) Burst < 100 ns (typical) Jitter Sweep 2.5 us Burst 1 ns; except pulse,300 ps Modulation Output Type for AM, FM, Sweep, PWM Amplitude Range ≧1Vpp Impedance > 10kΩ typical (fixed) Trigger Output Type for Burst, Sweep Level TTL Compatible into 50Ω Pulse Width > 450 ns Maximum Rate 1 MHz Fan-out ≧4 TTL load Impedance 50Ω typical Marker Output Type for ARB, Sweep Level TTL Compatible into 50Ω Fan-out ≧4 TTL load Impedance 50Ω typical Store/Recall 10 Groups of Setting Memories Interface GPIB, RS232, USB Display 4.3 inch TFT LCD480 × 3 (RGB) × 272 System Characteristics Configuration Times (typical) Function Change: Standard---->102ms Pulse-------->660ms Built-In Arb- >240msFrequency Change: 24msAmplitude Change: 50msOffset Change: 50msSelect User Arb: < 2s for 1M pointsModulation Change: < 200ms Arb Download Times(typical) Binary Code ASCII Code GPIB / RS-232 (115 Kbps) USB(Device) USB(Host) 1M points 189 Sec 34 Sec 70 Sec 512K points 95 Sec 18Sec 35 Sec 256K points 49 Sec 9 Sec 18 Sec 64K points 16 Sec 3 Sec 6 Sec 16K points 7 Sec 830mS 1340 mS 8K points 6 Sec 490mS 780mS 4K points 6 Sec 365mS 520 mS 2K points 5 Sec 300mS 390 mS General Specifications Power Source AC100～240V , 50～60Hz Power Consumption 65 VA Operating Environment Temperature to satisfy the specification : 18 ~ 28∘COperating temperature : 0 ~ 40∘CRelative Humidity: ≤ 80%, 0 ~ 40°C≤ 70%, 35 ~ 40°CInstallation category： CAT Ⅱ Operating Altitude 2000 meters Pollution Degree IEC 61010 Degree 2, Indoor Use Storage Temperature -10 ~ 70∘C, Humidity: ≤70% Dimensions (WxHxD) Bench Top : 265 (W) x 107 (H) x 374 (D) Weight Approx. 4kg Safety Designed to EN61010-1 EMC Tested to EN 55011, IEC-61326-1 Accessories GTL-110× 1 Instruction Manual×1Power cord×1 (1). A total of ten waveforms can be stored.(Every waveform can composed of 1M points maximum.)(2). Add 1/10th of output amplitude and offset specification per ∘C for operation outside of 0∘C to 28∘C range (1-year specification).(3). Edge time decreased at higher frequency.(4). Sine and square waveforms above 25 MHz are allowed only with an "Infinite" count.(5). Harmonic distortion and Spurious noise at low amplitudes is limited by a -70 dBm floor.
Related
Related
Related
Related