Tough exterior-grade, non-toxic polyurethane for wood or concrete surfaces Cold Weather AlertThis product may not perform properly if applied below the required temperature. Please check installation instructions on our website. Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 888.727.2101 AFM Safecoat EXT is an ultra-low VOC, crystal clear topical sealer that creates a durable, long-lasting finish on most wood and concrete surfaces. It's non-toxic and safe for everyone, even those with chemical sensitivities. Unlike oil-based polyurethanes which off-gas for weeks, this product has no odor once dried. AFM Safecoat EXT is a high solids, high build sealer comparable to conventional urethanes in performance, with exceptional durability and abrasion resistance—but without the harmful ingredients. It is water-resistant but not waterproof. It cannot be submerged underwater. Use two coats on unfinished or stained wood, concrete or previously painted surfaces. If a satin finish is desired, one base coat of gloss is required. This product dries fast and completely clear, and it will not yellow. Please read preparation instructions carefully. NOTE: This product is not to be used over oil-based polyurethanes or oil-based products. It cannot be used over Chalk Painted surfaces. Do not use over pressure treated wood. Not for use on stamped concrete. [tabs] Why We Like It If you're looking for a tough topical finish for outdoors, this is the best in the non-toxic variety we have seen. This is similar to most spar varnishes, but it's much safer. It can withstand abuse from Mother Nature by repelling moisture, freeze/thaw and the sun, as well as human nature, by repelling oil, grease, light chemicals and abrasion. Be sure to follow directions carefully as preparation is very important. Features & benefits Durable — tough and highly resistant to moisture, sun, light chemicals and abrasion Non-toxic — formaldehyde-free and includes no solvents, acetone, ammonia or harmful ingredients Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance Odorless when dried — very slight odor when wet, and virtually no odor when completely dry within 24 hours or longer if humid conditions Finish — gloss or satin (SATIN finishes requires a GLOSS coat first) Dries clear — never yellows like oil-based urethanes Easy-to-use — brush, pad or spray; water clean up NOTE: If using this product to seal in off-gassing of toxic chemicals, please call us at 1-800-405-0222 before using.
Related
Related
Related
Related