AI Driver Target Tracking Guidance Module for FPV Drone

OpenELAB Technology Ltd. Verified independent store

→

The AI Tracking Guidance Module is an advanced intelligent tracking and guidance system designed for FPV drones, multirotor platforms, and fixed‑wing aircraft. It integrates a high ‑performance camera, onboard AI processing unit, and flight‑control interface to deliver autonomous target recognition, automatic tracking, and precision guidance. By combining computer vision with flight‑control algorithms, the module significantly reduces pilot workload and enhances tracking accuracy in both manual and autonomous missions. The module “can autonomously recognize and automatically track targets (Human, Vehicles, FPV, Fixed‑wing aircraft)” and improves locking accuracy through intelligent algorithms. Features 1. Multi‑Firmware Compatibility Fully compatible with Betaflight, INAV, and PX4 Supports FPV quads, multirotors, and fixed‑wing aircraft Seamless integration with mainstream flight controllers (H743, F405, etc.) 2. Intelligent Target Recognition & Tracking Automatic recognition of typical targets: humans, vehicles, FPV drones, fixed‑wing aircraft Manual cursor‑based target selection Automatic lock‑on, re‑selection, and continuous tracking Works even in GPS‑denied environments 3. One‑Button Autonomous Flight (PX4 Only) Autonomous takeoff via RC switch Climbs to a configurable altitude (default 10 m) Automatically detects and locks onto targets within the camera’s field of view Supports in‑flight switching between autonomous and manual tracking modes 4. Night & Low‑Light Operation Optional thermal imaging module for nighttime missions Visible‑light camera supports low‑light night vision 5. Full Flight‑Control Integration Supports tracking in ANGLE and AIR modes (Betaflight) Default tracking control on Channel 8 OSD support for displaying pitch/roll angles, flight mode, and tracking status Smooth interaction with RC switches for lock‑on, cancel, and re‑select Package List AI Guidance Module ×1 7P‑4P SH1.0 module cable (pre‑installed) 4P SH1.0 reverse cable ×1 3P SH1.25 sub‑cable ×1 4P SH1.25 sub‑cable ×1 M2×4 lens screws ×2 M2×5 lens screws ×2 Interface & Connectivity Interface Description MIPI Camera input CVBS Analog video output USB Debugging & firmware updates FC UART Flight‑controller communication RC Receiver input (receiver connects to module; FC no longer needs RX) Power 5V / 10V power input Installation Guidelines 1. Camera Angle Setup Recommended upward tilt: 20° Quick method: Tilt the aircraft to 20°, adjust the camera until the crosshair aligns with an object 5 m away at the same height. 2. GNSS + Compass Module (Optional) Install away from the AI module and power wiring Use a magnetic ring on the GPS cable to reduce interference Manual includes a detailed installation diagram Flight Controller Integration Betaflight Tracking supported in ANGLE and AIR modes Channel 8 controls tracking states (cancel → reselect → lock) PID and Rate tuning recommendations included in the manual OSD angle display recommended for improving lock accuracy PX4 (QGroundControl) Factory firmware pre‑installed Required after reinstallation or long‑distance transport (>500 km): Compass calibration Gyroscope calibration Accelerometer calibration RC calibration (if stick outputs are inaccurate) Flight Modes Mode Description Manual / ANGLE Manual flight with optional manual target selection Height Hold Stable altitude mode Position Mode GPS position hold Locked Tracking Automatic recognition and lock‑on tracking One‑Button Autonomous Autonomous takeoff + auto‑tracking (PX4 only) Use Cases FPV racing and training Security patrol and target tracking Search & rescue assistance Fixed‑wing autonomous guidance Research and education Nighttime inspection (with thermal module) Show more