Ai-Thinker BW21-CBV Dual-Band Wi-Fi BLE Camera Module - Compact Wireless Vision Module for Embedded Products The Ai-Thinker BW21-CBV is a compact dual-band Wi-Fi, BLE, and camera module for embedded wireless vision products, camera nodes, edge sensing, and connected devices. It is better suited to custom PCB integration than the development kit version, making it useful once pinout, firmware, and power design have been validated. For evaluation before custom integration, compare it with the Ai-Thinker BW21-CBV-Kit. It can be combined with OpenELAB sensor modules for smart cameras, occupancy sensing, robot vision, and wireless telemetry prototypes. Module-level design requires careful antenna placement, power decoupling, boot strapping, firmware flashing access, and camera signal routing. Follow Ai-Thinker hardware guidelines before laying out a production PCB. Technical Specifications Parameter Value SKU AT-BW21-CBV Product Type Dual-band Wi-Fi BLE camera module Wireless Dual-band Wi-Fi and BLE per title Camera Support Camera module integration Use Case Embedded vision, connected cameras, AI demos Integration Custom PCB/module design Power Requirement Stable supply with RF peak-current margin Antenna Requirement Clearance and placement required Development Path Evaluate with kit before production Brand Ai-Thinker Board Layout & Label Guide Module Pads - Soldered interface to host PCB. Camera Interface - Connects to compatible camera hardware. RF/Antenna Area - Keep clear of metal and copper as required. Power Pins - Provide stable module power. UART / Download Pins - Used for flashing and diagnostics. Boot Strap Pins - Define boot mode. GPIO Pins - General control and peripheral functions. Grounding Note - Follow reference layout for RF and signal integrity. Application Scenarios 1. Bring-Up Checklist Script Use a serial terminal first to verify module boot output. python -m serial.tools.miniterm COM7 115200 2. GPIO Heartbeat Skeleton Blink a status GPIO after firmware starts. const int ledPin = 2; void setup() { pinMode(ledPin, OUTPUT); } void loop() { digitalWrite(ledPin, !digitalRead(ledPin)); delay(500); } 3. Camera Node Flow High-level firmware flow for a wireless camera node. void setup() { // Initialize serial, Wi-Fi, camera, and storage. } void loop() { // Capture frame, process locally, then send metadata. } Packing List 1 x Ai-Thinker BW21-CBV Dual-Band Wi-Fi BLE Camera Module FAQ Q: What is this module for?A: Embedded wireless camera and vision products. Q: How is it different from the kit?A: This is the module for integration; the kit is for easier evaluation. Q: Does it need a custom PCB?A: Usually yes for final products. Q: What affects Wi-Fi performance?A: Antenna layout, enclosure, grounding, and power quality. Q: Can I flash firmware through UART?A: Most modules expose serial flashing paths; follow Ai-Thinker docs. Q: Does it support BLE?A: The product title lists BLE. Q: What should I validate before PCB layout?A: Power, boot pins, camera interface, antenna clearance, and firmware tools. Q: Can it connect to other sensors?A: Yes, if GPIO and firmware support the needed interfaces.
Related
Related
Related
Related