ACC3 - 4AN 719 - CAN 50 cm The compact Analog CAN Converters ACC3 Connectable to AiM devices* Other devices Analog channels 4 fully configurable channels, 1 kHz each: TC, TR, 0÷5 V, 0÷12 V Speed inputs 2 (AN3-AN4), max frequency 10 kHz, internal pull-up for open drain/collector input External power 9÷15 V Connection 1 Analog 8 pins Binder 712 + AiM CAN 5 pins Binder 712 1 Analog 8 pins Binder 712 + USB CAN 7 pins Binder 712 Material PA6 30% glass Dimensions 44.0 x 38.0 x 19.8 mm Weight 50 g Waterproof IP65 * Not compatible with MXL2, MXS and MXG. ACC3 and ACC3 Open manage up to 4 analog inputs to a max frequency of 200 Hz each: Thermocouples Thermoresistances 0÷5 V 0÷12 V SPEED INPUTS Both converters feature 2 speed inputs at a maximum frequency of 10 kHz. SENSORS CONNECTIONS They can manage many different sensors, from thermocouples to sensors whose output is 0÷12V. Please, note that the thermocouples require dedicated compensated cables, so different kits and different harnesses and cables are available. CHANNEL CONFIGURATION Once the proper split harness has been chosen between the available range, you can configure the channels according to the kind of sensor you connect to the converters. ACC3 and ACC3 Open support up to four K type thermocouples to manage the temperatures. ACC3 OPEN VERSION EASY CONFIGURATION Every OPEN device can be connected to a PC via a dedicated USB cable: CAN OUTPUT ACC3 Open allows to build a CAN Output to communicate with external devices. You can set bit rate protocol, field messages and CAN payload details. The converter can also be used as an AiM Expansion, without any issues or limitations. SUSPENSION ANALYSIS ACC3 and ACC3 Open can be connected to Eclipse sensors. All the acquired data by AiM linear potentiometers can be managed through the new Suspension Analysis Tool in RaceStudio 3, for an even more complete performance analysis software.
