Introducing AirSense, the indoor air quality sensor. The perfect solution for monitoring the air quality in your home or office that is also compatible with ESPHome and Home Assistant. This sensor is equipped to provide accurate readings of indoor air quality, temperature, pressure, humidity, bVOCeq and CO2eq. And if that's not enough, it also features an RGB LED and a buzzer to alert you when the air quality is not optimal. Whether you are concerned about allergies, asthma, or other health issues, AirSense is the ideal choice. Its advanced technology, LEDs and buzzer make it easy to monitor and maintain healthy indoor air quality. Features: Indoor Air Quality Sensor bVOCeq Sensor CO2eq Sensor Temperature Sensor Humidity Sensor Pressure Sensor RGB LED Buzzer I²C STEMMA QT/Qwiic Connector 5 Additional GPIO's Wi-Fi Bluetooth BLE USB-C Small Form Factor (3.5cm diameter) Home Assistant/ESPHome Ready Open-source Code Easily Reprogrammable Getting Started Setup instructions and configuration for the AirSense can be found here:https://github.com/LoopOnCode/AirSense Click the button below to import the Home Assistant Blueprint for AirSense: Sensor Specifications Sensor Min Max Unit Temperature -40 85 °C Humidity 0 100 % Pressure 300 1100 hPa GPIO Extension Pins Pin Type ADC/RTC PU/PD PWM GPIO0 In/Out Yes Yes Yes GPIO1 In/Out Yes Yes Yes GPIO3 In/Out Yes Yes Yes GPIO4 In/Out Yes Yes Yes GPIO7 In/Out Yes Yes ADC: these pins can be used as ADC inputsRTC: these pins are RTC GPIOs and can be used in deep-sleep modePU/PD: these pins have software configurable pull-up/pull-down functionality. Misc Pin Type GPIO2 RGB LED GPIO5 I²C SDA GPIO6 I²C SCL GPIO10 Buzzer Power Pin Type +5V In/Out (max. 5V) +3.3V Out only Sensor Address Selection The I²C address of the sensor that reads gas, temperature, pressure and humidity can be altered if it conflicts with another I²C component you have added to the board. To do this, you must solder the ADDR pad. Addresses: Unsoldered: 0x77 Soldered: 0x76 ESP32 At the heart of the AirSense board is an ESP32-C3F with 4MByte of flash running at a clock speed of 160MHz. It has 2.4 GHz Wi-Fi and Bluetooth 5 (LE) connectivity. Datasheets Gas, Temperature, Humidity & Pressure Sensor - BME680 Addressable RGB LED - WS2812B MCU - ESP32-C3F
Related
Related
Related
Related