Features • Two (2) independently programmablechannels of ultra-low latency digitalmicrophone processing in one rack space.• Two (2) Mic/Line inputs, two (2) Mic/Lineoutputs, two (2) AES3 outputs, WordClock input.• Processing modules include Compression,Equalization, De-Essing, DownwardExpansion, Highpass and Lowpass filters,and Voice Symmetry.• Configure named presets for each on-airpersonality – up to 50, including factorypresets – using the included Windows®software over Ethernet.• Recall presets with convenient front panelcontrols, optional hardware remote(s), orthird-party control protocol. Performance Data INPUTSNominal Input Level: +4 dBu or -10 dBV line level, to -50 dBu mic level(software selectable) with 20 dB of headroomMaximum Input Level: +23 dBuInput Impedance: 6.67 kΩ balanced, > 3.3 kΩ unbalancedCMRR: > 75 dB @ 1 kHz, unity gainMic Pre-amp EIN:> -127 dB, 22 Hz - 22 kHz, 100 Ω source impedancePhantom Power: +48 VDCA/D Conversion: 24-bit delta/sigmaA/D Dynamic Range: 116 dB (A-Weighted)A/D THD+Noise: -102 dB (un-weighted); 1 kHz @ -2 dBFS with 0 dB gainA/D Latency: 0.25 mS OUTPUTSNominal Output Level:Analog: +4 dBu line level with 20 dB of headroomDigital: -20 dBFS. For unbalanced analog output, float (do not connect) theminus output terminal. Unbalanced usage results in 6 dB lower output level.Maximum Output Level:Analog: +24 dBu. Digital: 0 dBFSOutput Impedance:Analog: 200 Ω balanced, 100 Ω unbalanced. Digital: 110 ΩD/A Conversion: 24-bit delta/sigmaD/A Dynamic Range: 114 dB (A-Weighted)D/A THD+N: -98 dB (un-weighted); 1 kHz @ -2 dBFSD/A Latency: 0.2 mSMic Level Output Pad (Internal): -42 dB SYSTEMNominal Sampling Rate: 48 kHzWord Clock Input Range: 22 - 192 KHzA/D/A Frequency Response: 20 Hz - 20 kHz, +/- 0.25 dBA/D/A Dynamic Range: 113 dB (A-Weighted)A/D/A Latency: < 0.7 mS; with all DSP activeInterchannel Crosstalk: > -90 dB @ 1 kHz, typical Mechanical DataSpace Required:1U (WDH: 48.02 cm x 23.11 cm x 4.37 cm / 18.91 inx 9.1 in x 1.72 in), depth is specified from front panelto back of connectors.Allow at least 3 inches additional clearance for rearpanel connections. Additional depth may be requireddepending upon your specific wiring and connections. Electrical:100-240 VAC, 50/60 Hz, 25 Watts maximum.No line voltage switching required.
