Combination of pH Increaser and Test Strips Alkalinity Increaser: WAVE Total Alkalinity Increaser is used to increase the alkalinity of your spa water. Spa water tends to lose Total Alkalinity (TA), within days of you filling your spa with fresh water. Low Total Alkalinity will result in damage to your spa equipment, pH fluctuation and bather discomfort, ideal levels are between 100ppm (parts per million) and 140ppm. Application - Pre-dissolve the required amount of Total Alkalinity Plus in a clean plastic bucket filled with warm water. Stir the solution until the granules are fully dissolved. Ensure that your spa circulation pump is turned on before slowly pouring the solution directly onto your spa water surface. Continue to run your spa circulation pump for at least 15 minutes. Re-test your spa water and repeat dosage until a Total Alkalinity reading of between 100ppm and 140ppm is achieved. Allow 15 minutes before using your spa. 3 in 1 Test Strips: Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products. Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot. Test strips available: 3-way test strip providing testing on chlorine, pH, Alkalinity. Perfect for the residential user, Wave test strips are manufactured in the UK and subject to the same rigorous quality control as other pool testing products Supplied in pots of 50 tests, the procedure is exactly as expected - dip, shake off the excess and compare to the colour chart printed onto the pot.
